Mantus Snap-On Light, Rechargeable Rail Clamp Light, Warm-White and Red

$93.46 USD

Mantus Snap-On Light is a rechargeable clamp-on rail light with IPX5 water resistance, a white high mode of 140 lumens, and warm-white and red modes. It snaps onto compatible stainless rails without permanent wiring, and is offered in two rail-size options.

SKU: SOL Category: Tags: , Brand:

Description

The Mantus Snap-On Light is a rechargeable clamp-on light for cockpit and utility work where a fixed fixture is not practical. It snaps onto a compatible stainless rail without permanent wiring. This listing covers two clamp sizes, listed below. Its modes give warm-white work or ambient light, red night-vision modes, SOS and automatic low-light activation.

Features

  • IPX5 water resistance rating.
  • White high mode gives 140 lumens with a 14 m (46 ft) beam distance.
  • Warm-white light at 2,700 K, plus red high and red low modes.
  • Automatic low-light activation and SOS mode.
  • Power-bank charging for a mobile device.
  • Rechargeable lithium-polymer battery, 2,700 mAh, 3.7 V.
  • Drop rating of 2 m (6.6 ft).
  • Mantus lists approximate runtimes from 16 hours on white high to 200 hours on red low.

Specifications

Brand Mantus
SKU SOL 1, SOL 1 1/4
UPC 853750004558
Rail options 7/8–1 in (22–25 mm) or 1 1/8–1 1/4 in (29–32 mm)
Water resistance IPX5
Drop rating 2 m (6.6 ft)
Battery Rechargeable lithium-polymer, 2,700 mAh, 3.7 V
White-light colour Warm white, 2,700 K
Weight 150 g (5.3 oz) with battery, excluding clamp
Red high mode Red, approximate runtime 100 hours
White low mode 7 lumens, 3 m (10 ft) beam distance, approximate runtime 120 hours
White medium mode 55 lumens, 9 m (30 ft) beam distance, approximate runtime 53 hours
White high mode 140 lumens, 14 m (46 ft) beam distance, approximate runtime 16 hours
SOS mode 15 lumens, approximate runtime 156 hours
Red low mode Red, approximate runtime 200 hours

Compatibility

The Mantus Snap-On Light snaps onto a compatible stainless rail in the two rail fits listed above. Measure the outside diameter of the rail before you choose a clamp size.

Important note

This is cockpit and utility lighting, not a substitute for required navigation lights.

Additional information

Clamp Size

1 in, 1 1/4 in