Description
The Dickinson Pacific Diesel Stove is a diesel burning stove with a cast iron cooktop, built to fit most standard stove cutouts. It gives comfortable, dry heat and can be fitted with a 1-turn or 2-turn hot water coil. The stove has a laser-cut design in 304 stainless steel. Choose the hot water coil option you need on the product page.
Features
- Fits most standard stove cutouts.
- Burns diesel economically and gives cozy, dry heat.
- Cast iron cooktop for cooking.
- Laser-cut design in 304 stainless steel.
- Produces dry heat to remove moisture from the vessel.
- Includes a 12v fan for start-up and draft assistance.
- Factory set for #2 diesel; valves for kerosene and #1 diesel are available.
- Hot water coil options: a 1-turn coil heats 5-10 gallons of water; a 2-turn coil heats 15-20 gallons.
Specifications
| Part number | 00-PAC |
| GTIN | 814901011450 |
| Width | 21.75” |
| Height | 23.50” |
| Depth | 21.50” |
| Weight | 126 lbs. |
| Oven size (width x depth x height) | 10.25” x 13” x 10.5” |
| Fuel consumption (24hr), low | 1.30 gal |
| Fuel consumption (24hr), high | 3.20 gal |
| Heat output, low | 6500 BTU |
| Heat output, high | 16250 BTU |
| Chimney diameter | 5” diameter chimney parts |
| Chimney length | minimum 4ft, maximum 8ft (straight run with no elbows is best) |
| Factory fuel setting | #2 diesel |
| Draft assist fan | 12v (can be converted to 24v on request) |
What’s included
- 12v draft assist fan
Documents referenced with this stove: Diesel Stove Installation & Operating Manual and Pacific Diesel Information Sheet.
Installation requirements
- Requires 5” diameter chimney parts.
- Requires a permanent fresh air vent in the unit’s area.
- Sailboat installation: must face fore or aft. If port or starboard facing is desired, valve adjustment may be needed.
The stove must be shipped on a pallet. Follow the installation guidelines for optimal performance.








