Dickinson Newport Diesel Heater 00-NEW Bulkhead Mount

$935.77 USD

The Dickinson Newport 00-NEW is a compact diesel heater that mounts on a bulkhead. It lists 6500 BTU low and 16250 BTU high heat output, with a 304 stainless steel body and a weight of 22 lbs.

Ships from manufacturer within 2 weeks

Description

The Newport diesel heater from Dickinson, model 00-NEW, is a compact, diesel-burning heater that mounts on a bulkhead. It gives comfortable, dry heat, and Dickinson says it removes moisture inside the vessel. The body is laser-cut 304 stainless steel, and the heater weighs 22 lbs.

Features

  • Compact design that mounts on the bulkhead, with a laser-cut body in 304 stainless steel.
  • Includes a 12v fan for start-up and draft assistance; Dickinson says it can be changed to 24v if requested when ordering.
  • Valve factory set for #2 diesel; kerosene and #1 diesel valves are also available.
  • Sailboats: face fore or aft; for port or starboard facing, the valve can be side-mounted for proper fuel flow on heels up to 15 degrees.
  • Optional one-turn hot water coil that can heat 5-10 gallons of water; it is listed separately as #00-NEW-12-1T.
  • Requires a permanent fresh air vent in the unit’s area and 3” diameter chimney parts.

Specifications

Part number 00-NEW
UPC 814901011504
Type Diesel bulkhead mount heater
Material 304 stainless steel, laser-cut design
Width 8.50″
Height 19.75″
Depth 10.50″
Weight 22 lbs
Heat output, low 6500 BTU
Heat output, high 16250 BTU
Fuel consumption (24hr), low 1.29 gal
Fuel consumption (24hr), high 3.20 gal
Fuel valve (factory set) #2 diesel
Draft assist fan 12v
Chimney diameter 3” diameter parts
Chimney length Minimum 4ft, maximum 8ft (straight run with no elbows is best)
Barometric damper Recommended for chimneys 6ft or longer
Hot water coil (option) One-turn coil, #00-NEW-12-1T, heats 5-10 gallons of water

What’s included

  • Newport diesel heater, #00-NEW
  • 12v draft assist fan
  • Valve factory set for #2 diesel

Not included / sold separately: the one-turn hot water coil, listed as a separate option (#00-NEW-12-1T). Chimney parts are required (3” diameter), but they are not listed as included.

Follow the installation guidelines for optimal performance. An installation and operating manual is available for this heater.