Dickinson Marine Lofoten Diesel Floormount Heater 00-LOF

$1,000.25 USD

Dickinson Marine’s Lofoten 00-LOF is a compact diesel heater for floor mounting, with a small cast iron cooktop and a laser-cut 304 stainless steel design. It comes with a 12v draft assist fan and a valve factory set for #2 diesel.

Ships from manufacturer within 2 weeks

Description

The Lofoten diesel floormount heater from Dickinson Marine, part number 00-LOF, is a compact diesel heater designed for floor mounting. It gives dry heat and has a small cast iron cooktop for cooking. It is set at the factory for #2 diesel, and Dickinson also offers valves for kerosene and #1 diesel.

Features

  • Compact heater designed for floor mounting, measuring 10.75″ wide, 18″ high and 17″ deep.
  • Produces dry heat, which Dickinson says eliminates moisture inside the vessel.
  • Small cast iron cooktop for cooking.
  • Laser-cut design in 304 stainless steel.
  • Includes a 12v fan for start-up and draft assistance.
  • Dickinson says the fan can be converted to 24v if requested when ordering.
  • Valve factory set for #2 diesel; valves for kerosene and #1 diesel are also available.
  • Optional hot water coils: a 1-turn coil can heat 5-10 gallons of water, and a 2-turn coil can heat 15-20 gallons.

Specifications

Part number 00-LOF
UPC 814901011528
Width 10.75″
Height 18″
Depth 17″
Weight 31 lbs.
Body material 304 stainless steel
Heat output, low 6500 BTU
Heat output, high 16250 BTU
Fuel consumption (24hr), low 1.29 gal
Fuel consumption (24hr), high 3.20 gal
Factory fuel setting #2 diesel
Draft assist fan 12v
Chimney parts 4” diameter
Chimney length, ideal 6ft with no elbows
Chimney length, required range minimum 4ft, maximum 8ft
Hot water coil, 1-turn heats 5-10 gallons of water
Hot water coil, 2-turn heats 15-20 gallons of water

What’s included

  • Lofoten diesel floormount heater, part 00-LOF
  • 12v draft assist fan
  • Valve factory set for #2 diesel

Not included / sold separately: hot water coils, the 1-turn coil (00-LOF-12-1T) or the 2-turn coil (00-LOF-12-2T), which are listed as separate options.

Installation requirements

This Lofoten diesel floormount heater has these installation requirements:

  • Requires 4” diameter chimney parts.
  • Ideal chimney length is 6ft with no elbows, with a minimum of 4ft and a maximum of 8ft required.
  • For chimneys 6ft or longer, a barometric damper is highly recommended.
  • Requires a permanent fresh air vent in the unit’s area.
  • Sailboat installation: must face fore or aft. For port or starboard facing, mount the valve on the side to ensure proper fuel flow, especially on heels up to 15 degrees.

Follow the installation guidelines for optimal performance. Dickinson’s page also refers to a Diesel Heater Installation & Operating Manual and a Lofoten Information Sheet.