Description
The Dickinson Marine 00-2BP is a two burner propane drop-in cooktop with a heavy-duty stainless steel body. The left burner puts out 11,000 BTU and the right burner 7,000 BTU, and both have flame-out protection. A push-and-turn electronic ignition starts the burners, and the unit is set into the counter with under-counter brackets.
Features
- Heavy-duty stainless steel construction
- Left burner heat output of 11,000 BTU and right burner heat output of 7,000 BTU
- Flame-out protection on both burners
- Push-and-turn electronic ignition
- Laser cut design, which Dickinson Marine describes as precise and attractive
- Installs with under-counter brackets and fits standard cut-outs
- Cookware limit of 9” for the large burner and 7” for the small burner
Specifications
| Part number | 00-2BP |
| Product type | Two burner propane drop-in cooktop |
| Fuel | Propane |
| Heat output, left burner | 11,000 BTU |
| Heat output, right burner | 7,000 BTU |
| Ignition | Push and turn electronic |
| Cookware size limit, large burner | 9” |
| Cookware size limit, small burner | 7” |
| Material | Heavy-duty stainless steel |
| Width | 23″ |
| Depth | 14.125″ |
| Height | 6.25″ |
| Installation height | 4.75 inches |
| Weight | 26 lbs |
| Counter cut-out width | 21.5″ |
| Counter cut-out depth | 12.5″ |
| Counter cut-out height | 6.25″ |
| Gas hook-up fitting | Sits 1.5” below the unit |
What’s included
- 1 set of pot holders
- 1 sea rail
- 1 removable wooden cutting board
Not included / sold separately: gas hose, 11” WC regulator, and fittings.
Installation
The page lists the 00-2BP as fitting standard cut-outs. The counter cut-out measures 21.5″ wide, 12.5″ deep and 6.25″ high, and the gas hook-up fitting sits 1.5” below the unit.
The Two Burner Drop-in Propane Cooktop Installation & Operating Manual and a Two Burner Information Sheet are listed with this product.








