Description
The Dickinson Bering Diesel Cookstove is a diesel-burning stove with a cast iron cooktop and a chimney outlet on the right side. Choose the 1 turn or 2 turn hot water coil option on this page. It needs 5” diameter chimney parts and a permanent fresh air vent in the unit’s area.
Features
- Cast iron cooktop for cooking, with the chimney outlet on the right side.
- Laser-cut design in 304 stainless steel.
- Dickinson says it produces dry heat that eliminates moisture inside the vessel.
- Diesel-burning: the valve is factory set for #2 diesel, and valves for kerosene and #1 diesel are also available.
- Hot water coil options: a 1-turn coil heats 5-10 gallons of water; a 2-turn coil heats 15-20 gallons for larger quantities.
- Includes a 12v fan for start-up and draft assistance, which can be converted to 24v.
- Sailboat installation: it must face fore or aft. For port or starboard facing, mount the valve on the side, especially on heels up to 15 degrees.
Specifications
| Part numbers | 00-BER-12-1T (with 1 turn water coil); 00-BER-12-2T (with 2 turn water coil) |
| Width | 23.25″ |
| Height | 23.50″ |
| Depth | 16.25″ |
| Weight | 93 lbs. |
| Heat output | Low: 6500 BTU; High: 16250 BTU |
| Fuel consumption (24hr) | Low: 1.30 gal; High: 3.20 gal |
| Oven size | Width 10.5”, depth 12.75”, height 10.5” |
| Chimney diameter | 5” diameter chimney parts |
| Draft assist fan | 12v |
| Factory fuel setting | #2 diesel |
| Hot water coil capacity | 1 turn: 5-10 gallons; 2 turn: 15-20 gallons |
What’s included
The Dickinson Bering Diesel Cookstove includes a 12v fan for start-up and draft assistance.
Installation requirements
- Requires 5” diameter chimney parts.
- Ideal chimney length is 6ft with no elbows, with a minimum of 4ft and a maximum of 8ft.
- For chimneys 6ft or longer, a barometric damper is highly recommended.
- Needs a permanent fresh air vent in the unit’s area.
Dickinson says to follow the installation guidelines for optimal performance.









