Dickinson 00-ATL-12-1T Atlantic Diesel Stove with One Turn Water Coil

$3,080.77 USD

Dickinson 00-ATL-12-1T Atlantic Diesel Stove is a diesel-burning cookstove with a cast iron cooktop, a 304 stainless steel body and a one-turn hot water coil option. Heat output runs from 8125 BTU low to 24375 BTU high.

Ships from manufacturer within 2 weeks

SKU: 00-ATL-12-1T Category: Tags: , , , Brand:

Description

The Atlantic Diesel Stove from Dickinson is a diesel-burning cookstove with a cast iron cooktop, and it is Dickinson’s largest stove. This 00-ATL-12-1T version is the Atlantic with a one-turn hot water coil, which can heat 5-10 gallons of water. It provides dry heat, and installation notes for sailboats and chimneys are listed below.

Features

  • Cast iron cooktop for cooking.
  • Produces dry heat, which Dickinson says removes moisture inside the vessel.
  • Laser-cut design in 304 stainless steel.
  • Includes a 12v fan for start-up and draft assistance.
  • Valve is factory set for #2 diesel; valves for kerosene and #1 diesel are also available.
  • Sailboat installation: the stove must face fore or aft. For port or starboard facing, mount the valve on the side, especially on heels up to 15 degrees.
  • One-turn hot water coil option, which can heat 5-10 gallons of water.

Specifications

Part number 00-ATL-12-1T
UPC 814901012273
Width 30.50″
Height 28.75″
Depth 23″
Weight 189 lbs.
Oven width 16”
Oven depth 14.5”
Oven height 12”
Heat output, low 8125 BTU
Heat output, high 24375 BTU
Fuel consumption, low (24hr) 1.89 gal
Fuel consumption, high (24hr) 4.50 gal
Factory fuel setting #2 diesel
Draft assist fan 12v
Hot water coil (one-turn) 5-10 gallons

What’s included

The stove includes a 12v fan for start-up and draft assistance.

Installation requirements

  • Requires 5” diameter chimney parts.
  • Ideal chimney length is 6ft with no elbows; a minimum of 4ft and a maximum of 8ft is required.
  • For chimneys 6ft or longer, a barometric damper is highly recommended.
  • A permanent fresh air vent is needed in the room where the unit is installed.