Description
The Airmar WS-220WX-HTR is an NMEA 0183 weather station with a thermostatically controlled heater, built for commercial-fishing weather monitoring in ice-prone areas. It calculates theoretical wind speed and direction from the apparent wind, the vessel’s speed and its heading. This heater model has no relative humidity sensor.
Features
- Ultrasonic measurement of apparent and theoretical wind speed and direction
- Thermostatically controlled heater element that cycles on when the sensor reaches 1°C
- Barometric pressure, air temperature and wind chill temperature
- Internal 10 Hz GPS for position, speed over ground and course over ground
- Three-axis solid-state compass with dynamic stabilization, plus a three-axis rate gyro for rate-of-turn data
- Three-axis accelerometer for pitch and roll information
- Housing rated IPX6 for water-ingress protection
- Data output through a single cable (various lengths available)
Specifications
| Part number | WS-220WX-HTR |
| Model or series | 220WX, 220WXH |
| Data output protocol | NMEA 0183 over Serial RS-422, Serial RS-232 |
| Output rate | 1 Hz typical. User selectable. 10 Hz maximum recommended |
| Power supply voltage | 12 to 24 VDC |
| Power supply current | <38 mA (<0.9 W) at 24 VDC |
| Heater supply current | <2.5 A (<60 W) at 24 VDC |
| Operating temperature range | -25 to 55°C (-13 to 131°F) |
| Heater operating temperature range | -40 to 55°C (-40 to 131°F) |
| Wind speed range | 0 to 40 m/s (0 to 89 MPH) |
| Wind speed accuracy | 5% at 10 m/s at 4 angles |
| Wind speed resolution | 0.1 m/s |
| Wind direction range | 0° to 359.9° |
| Wind direction accuracy | ±3° at 10 m/s |
| Air temperature range | -40 to 80°C (-40 to 176°F) |
| Air temperature accuracy | ±1.1°C at 20°C |
| Barometric pressure range | 300 to 1100 hPa |
| Barometric pressure accuracy | ±0.5 hPa at 25°C (or better) |
| Compass accuracy | 1° static heading accuracy; 2° dynamic heading accuracy |
| Pitch and roll | MEMS, range 50°, accuracy ±1° in range of ±30° |
| GPS position accuracy | 3 m (10′) CEP |
| Mounting thread | Standard 1″-14 UNS (3/4″ NPT optional) |
| Weight | 0.8 lb |
| Certifications and standards | CE, IPX6, RoHS, IEC61000-4-2, IEC60945, IEC60950_1C, IEC60950_22A, EN55022, EN55024, EN14982 |
Not included
Cables are sold separately. No cable is included with the weather station.
Network use
- The 220WXH cannot be used with an NMEA 2000 CAN bus network.







