Description
The Airmar SS60 is a standard 50/200kHz fishfinder transducer with a stainless steel housing, set at 0 degrees of tilt. It is a low-profile through-hull unit rated at 600 watts, with a 60mm hull aperture and a temperature sensor. The SS60 uses the Mix and Match system, so the sounder cable can be changed without disturbing the transducer.
Features
- Standard non-CHIRP fishfinder transducer for 50kHz and 200kHz
- Rated at 600 watts
- Low-profile through-hull mounting with a 60mm hull aperture
- Stainless steel housing
- Beam width of 45 degrees at 50kHz and 12 degrees at 200kHz
- Has a temperature sensor
- Mix and Match system: swap the cable when the sounder changes, without disturbing the transducer
Specifications
| Base transducer part number | SS60-0-MM (Airmar part 31-730-2-01) |
| Tilt | 0 degrees |
| Type | Standard non-CHIRP fishfinder transducer |
| Frequency | 50kHz / 200kHz |
| Beam width | 45 degrees at 50kHz / 12 degrees at 200kHz |
| Power rating | 600 watts |
| Mounting | Low-profile through-hull |
| Housing | Stainless steel |
| Hull aperture | 60mm |
| Usable shaft length | 68.5mm |
| Temperature sensor | Yes |
| Pigtail cable | 2 meter, ends in an Airmar 5-pin female connector |
| UPC | 801769015706 |
Mix and Match cable
The base transducer has a 2 meter pigtail with an Airmar 5-pin female connector. A Mix and Match cable joins the pigtail to the sounder, with a male Airmar 5-pin connector at one end and a brand-specific connector at the other. Installation requires a base model plus one of these cables.
The MM-RAYA cable (Airmar part 33-622-01, 9 meters) is listed for Raymarine current series 6/9-pin sounders.






