Description
The Airmar SS60-20-MM is a standard non-CHIRP fishfinder transducer with a stainless steel housing. It is a low-profile through-hull unit with a 20-degree tilt that works on 50 kHz and 200 kHz. It is a Mix and Match base model, so it connects to your fishfinder through a separate MM cable.
Features
- Operates at 50 kHz and 200 kHz
- Power rating of 600 watts
- Beam width of 45 degrees at 50 kHz and 12 degrees at 200 kHz
- Stainless steel housing with low-profile through-hull mounting
- Includes a temperature sensor
- Mix and Match design: swap to a different MM cable when you change fishfinders, without disturbing the transducer
Specifications
| Maker part number | SS60-20-MM |
| Airmar part number | 31-704-1-01 |
| Type | Standard non-CHIRP fishfinder transducer |
| Frequency | 50 kHz / 200 kHz |
| Beam width | 45 degrees at 50kHz / 12 degrees at 200kHz |
| Power rating | 600 watts |
| Tilt | 20 degrees |
| Mounting | Low-profile through-hull |
| Housing | Stainless Steel |
| Hull aperture | 2.375′ (60mm) |
| Usable shaft length | 2.70′ (68.5mm) |
| Temperature sensor | Yes |
| Mix and Match | Yes |
| Pigtail cable | 2 meters, permanently attached, ends in an Airmar 5-pin female connector |
What’s included
- SS60-20-MM base transducer with its 2 meter pigtail cable, permanently attached
- Not included: a Mix and Match cable to suit your fishfinder. Installation requires one, and it is sold separately.
Mix and Match cables
Installation requires one of the Mix and Match cables along with the base model. The Mix and Match cables are 9 meters long. Pick the cable that matches your fishfinder, such as MM-DT-LOW for Lowrance/Simrad blue 7-pin, MM-6DT for Garmin 6-pin or MM-10FUR for Furuno 10-pin.






