Description
Airmar SS60-20-8S is a stainless steel thru-hull transducer for depth and temperature readings. It is the stainless steel version of the B60 tilted element transducer. The ceramic element sits tilted inside the housing for built-in deadrise compensation, which gives a vertical beam without a fairing. It is engineered for center-console and trailered boats up to 8 m (25′).
Features
- Depth and temperature readings at 50/200 kHz
- Stainless steel housing
- Mid-performance transducer, engineered for center-console and trailered boats
- Fixed 20 degree tilt for hull deadrise of 16 to 24 degrees
- Nearly flush housing, with only 5 mm (3/16 inch) extending outside the hull
- Low-profile protrusion below the hull, with no effect on the boat’s running performance
- Cone angle of 45 degrees at 50 kHz and 12 degrees at 200 kHz
- 600 W RMS power rating
Specifications
| Model | Airmar SS60-20-8S |
| Part number | SS60-20-8S |
| UPC | 801769015997 |
| Frequency | 50/200 kHz |
| Power | 600 W RMS |
| Tilt | 20 degrees, fixed |
| Hull deadrise | 16 degrees to 24 degrees |
| Boat size | Up to 8 m (25′) |
| Maximum depth range, 50 kHz | 235 m to 353 m (800′ to 1,200′) |
| Maximum depth range, 200 kHz | 118 m to 206 m (400′ to 700′) |
| Cone angle, 50 kHz | 45 degrees |
| Cone angle, 200 kHz | 12 degrees |
| Housing | Stainless steel |
| Protrusion outside hull | 5 mm (3/16 inch) |
| Usable shaft length | approx. 68.5 mm |
| Connector | 8-pin SI-TEX |






