Description
The Airmar SS60-0-MM is a low-profile, tilted through-hull fishfinder transducer for 50 kHz and 200 kHz sonar. It has a stainless steel housing, a 0 degree tilt and a 600W power rating. It is a Mix and Match base model, so the sounder connection comes from a separate MM cable.
Features
- Low-profile through-hull design for 50/200 kHz fishfinder use
- 600W power rating
- Dual frequency: 45 degree beam at 50 kHz and 12 degree beam at 200 kHz
- Stainless steel housing, the stainless version of the B60
- Includes a temperature sensor
- Swap the MM cable when you change sounders and the transducer stays in place
- 2 meter pigtail ends in an Airmar 5-pin female connector
Specifications
| Part number | SS60-0-MM |
| Airmar part number | 31-730-2-01 |
| Tilt | 0 degrees |
| Frequency | 50 kHz / 200 kHz |
| Beam width | 45 degrees at 50 kHz / 12 degrees at 200 kHz |
| Power rating | 600 watts |
| Mounting | Low-profile through-hull |
| Housing | Stainless Steel |
| Hull aperture | 60 mm |
| Usable shaft length | 68.5 mm |
| Pigtail cable | 2 meters, ends in Airmar 5-pin female connector |
| Mix and Match cable | Sold separately, 9 meters |
| Temperature sensor | Yes |
| Tilted element | Yes |
What’s included
The SS60-0-MM base transducer with its 2 meter pigtail cable.
Not included / sold separately
- Mix and Match cable (9 meters), chosen to match your sounder. Installation needs a base model plus one MM cable.
Compatibility
Pick the Mix and Match cable that matches your sounder’s connector. For example, MM-8G fits Garmin blue 8-pin, MM-DT-LOW fits Lowrance/Simrad blue 7-pin, and MM-6NAV fits Navman/Northstar/Simrad 6-pin.






