Description
The Airmar SS510ER-200-66 is an EchoRange 200 kHz depth and temperature transducer with a 20m cable, suited to bridge scour monitoring, sediment transfer studies and portable hydrographic surveys. Its smart sensor processes depth and temperature inside the sensor, and the readings can be shown instantly on any device that accepts NMEA data.
Features
- 200 kHz frequency band with a 9° beam angle
- Embedded electronics process depth and temperature inside the Airmar SS510ER-200-66 sensor
- Outputs NMEA 0183 data at 4800 baud by default
- Portable mount for survey poles, or internal or external hull mounting
- Housing depth rating of submersible to 10 m (33′)
- Reverse polarity protection
- Power supply of 9 to 40 VDC, regulated
- Stainless steel housing
Specifications
| Part number | SS510ER-200-66 |
| Frequency band | 200 kHz |
| Beam angle | 9° |
| Cable length | 20m |
| Depth accuracy | 99.46% at full range |
| Maximum depth reading | 200 m (656′) |
| Minimum depth reading | 0.4 m (15.75″), limited in manual mode |
| Depth display resolution | 1 cm (.40″) |
| Transducer functions | Depth, Temperature |
| Temperature resolution | 0.09C |
| Temperature sensor | 10k ohm +/-0.05C accuracy |
| Comm method | NMEA 0183/RS422 |
| NMEA 0183 baud rate | 4800 (Default) |
| Full auto mode data output rate | From 0.1 to 25 sec/interval |
| Power supply voltage | 9 to 40 VDC, Regulated |
| Current draw | 150 mA @ 12 V for 200 kHz |
| Reverse polarity protection | Yes |
| Housing depth rating | Submersible to 10 m (33′) |
| Connector | Bare Wire |
| Stem thread | 1/2″-14 NPS |
| Mounting options | Portable mount for installation on survey poles / Internal or external hull mount |
| Power and data cable | C304, 4 twisted pairs with TPR jacket |
| Operating temperature range | -5C to +60C |
| Storage temperature range | -30 to 70°C (-22 to 158°F) |
| CE certification | Marine standard IEC60945 |






