Description
The Airmar SS264W is a single-frequency 50 khz thru-hull transducer with 12 degrees of tilt and a low profile. It has a 25 degree cone angle and is only for boats with 8-16 degrees of deadrise at the mounting location. Each unit is new old stock in its original box, with the install kit and original mounting accessories.
Features
- Single-frequency 50 khz element for deep drop use
- 12 degrees of tilt in a low profile thru-hull design
- 25 degree cone angle
- For boats with 8-16 degrees of deadrise at the mounting location
- No fairing block or pocket mounting needed
- Similar performance to the low frequency element in the B260/SS260, with a slightly wider beamwidth
- Mix and match design with a Furuno 10-pin connector
This unit is 50 khz only. Dual frequency needs a second SS264 200 khz transducer, which has been discontinued. Another option is to wire this transducer and your existing one to a transducer switchbox, such as the SB260.
Specifications
| Model | SS264W |
| Brand | Airmar |
| Frequency | 50 khz |
| Frequency type | Single frequency |
| Mounting | Thru-hull |
| Element profile | Low profile |
| Tilt angle | 12 degrees |
| Cone angle | 25 degree |
| Deadrise range | 8-16 degrees |
| Connector | Furuno 10-pin (mix and match) |
| Cable length | Around 30 feet |
| Condition | New old stock, original box |
What’s included
- SS264W transducer in its original box
- Install kit
- Original mounting accessories
- Original instructions
Works with
It plugs into any Furuno 10-pin unit, or into a 12-pin unit with a 10 to 12 adapter. It fits the DFF1, TZT2 and TZT3.






