Airmar P79-8S In-Hull Depth Transducer, 50/200 kHz

$227.96 USD

Airmar P79-8S in-hull depth transducer with an 8-pin Si-Tex connector. It mounts inside the hull with no holes to drill, works at 50/200 kHz, and adjusts to deadrise angles up to 22 degrees.

Ships from manufacturer within 2 weeks

SKU: P79-8S Category: Tags: , Brand:

Description

The Airmar P79-8S is an in-hull depth transducer with an 8-pin Si-Tex connector that reads depth at 50/200 kHz. Its base mounts inside the hull and is bonded to it, so there are no holes to drill and no hull protrusions. The transducer twists into the base, and an adjustable locking ring sets the beam for hull deadrise angles up to 22 degrees.

Features

  • Depth only, operating at 50/200 kHz
  • No holes to drill and no hull protrusions
  • Adjustable locking ring sets the beam for hull deadrise from 2 degrees to 22 degrees
  • Recommended for solid fiberglass hulls
  • Epoxies to aluminum hulls under 0.38 mm (0.150) thick
  • Recommended for planing-hull power boats, trailered boats and rigid inflatable boats
  • Boat size: up to 8 m (25′)

Because the transducer sits inside the hull, it suits rigid inflatable boats (RIBs) and racing sailboats.

Specifications

Part number P79-8S
UPC 801769012583
Type In-hull transducer
Measurement Depth only
Frequency 50/200 kHz
Power rating 600W
Connector Si-Tex 8-pin
Transducer body Plastic
Deadrise angle 2 degrees to 22 degrees
Recommended hull Solid fiberglass
Aluminum hull Epoxies to hulls under 0.38 mm (0.150) thick
Boat size Up to 8 m (25′)

Installation

  1. Mount the base flange inside the hull.
  2. Adjust the locking ring to the hull’s deadrise angle.
  3. Fill the base with propylene glycol anti-freeze.
  4. Turn and lock the transducer into the base.

Fits

Fits Si-Tex units with an 8-pin connector.