Description
The Airmar P319-DT-BL is a plastic thru-hull transducer that works at 50/200 kHz and reads depth and temperature. It uses a Lowrance/Simrad BL Blue 7-pin connector and has a single ceramic element in a low profile housing. The nearly flush design leaves only 5 mm outside the hull, and it comes with a spacer, washer and hull nut.
Features
- Dual frequency operation at 50/200 kHz from one ceramic element.
- Built-in temperature sensor for depth and temperature readings.
- Low profile plastic housing; only 5 mm extends outside the hull.
- 600W power rating.
- Hole diameter of 51 mm (2″).
- Recommended for relatively flat bottoms: 0-7 degrees deadrise gives optimum performance, and it works on deadrises up to 12 degrees.
Specifications
| Part number | P319-DT-BL |
| Frequency | 50/200 kHz, dual frequency |
| Element | Single ceramic element |
| Power | 600W |
| Sensor | Depth and temperature (built-in temperature sensor) |
| Connector | Lowrance/Simrad BL Blue 7-pin |
| Housing | Plastic, low profile |
| Mounting | Thru-hull |
| Hole diameter | 51 mm (2″) |
| Extends outside hull | 5 mm |
| Hull deadrise | 0-7 degrees recommended; works up to 12 degrees |
What’s included
- P319-DT-BL transducer
- Hull nut, washer and spacer
- Installation instructions
Compatibility
The connector is the Lowrance/Simrad BL Blue 7-pin. For newer units with an xSonic transducer connector, use the 000-13313-001 adapter cable.






