Description
The Airmar MM1-DST-8G is an 8m Mix and Match transducer cable for 1kW transducers. It joins a 9-pin female connector at one end to an 8-pin Garmin depth and temperature connector at the other. Because the transducer and cable are separate parts, you can keep the transducer in place and swap only this cable if you change electronics brand later.
Features
- 8 m cable length
- 9-pin female connector on one end, for the 9-pin male pigtail on a 1kW Mix and Match transducer
- 8-pin Garmin connector on the other end, for Garmin depth/temperature transducers
- Mix and Match design: keep the transducer and replace only the cable when you change electronics brand
- The transducer and this cable are both needed for an installation
- Not for use with 600W transducers or CHIRP transducers
Specifications
| Model | MM1-DST-8G |
| Brand | Airmar |
| Item name | Mix and Match Transducer Cable |
| Series | 1kW |
| Length | 8 m |
| Connection type | 9-Pin Female to 8-Pin Garmin Depth/Temperature Transducer |
| Compatibility | B164 Transducer, Garmin GSD24 Depth/Temperature Transducer |
| Weight | 0.95 lbs |
| Dimensions | 6 × 6 × 2 in |
Compatibility
This cable is listed for the B164 transducer and the Garmin GSD24 Depth/Temperature Transducer. It is for 1kW Mix and Match transducers. It cannot be used with 600W transducers or CHIRP transducers.






