Description
The Airmar DT812PV-235-N2 is a low-profile, retractable plastic thru-hull Smart Sensor that computes depth and temperature and sends the data to any NMEA 0183 or NMEA 2000 display. It operates at 235 kHz with a fixed 12° tilt and suits power and sailboat applications. The signal is processed inside the sensor, so a single cable carries the data to the display.
Features
- Fixed 12° tilt for 8° to 15° deadrise
- Broadband ceramic with a urethane face that gives better sensitivity
- Operates at 235 kHz, which eliminates interference with fishfinders
- Runs alongside other Airmar 50/200 kHz transducers on board with no interference
- Depth readings from a minimum range of 0.5M (1.6′) to a maximum of 180M (594′)
- Retractable insert for easy servicing; the self-closing valve limits water flow into the vessel when removed for cleaning
- NMEA 2000 output with depth and temperature data over one cable
Specifications
| Part number | DT812PV-235-N2 |
| Brand | Airmar |
| Housing material | Plastic |
| Frequency | 235 kHz |
| Tilt | Fixed 12° |
| Cone | 12° |
| Maximum depth range | 180M (594′) |
| Minimum range | 0.5M (1.6′) |
| Output | NMEA 2000 |
| Data | Depth and temperature |
| Power | 100 W RMS |
| Cable | 6M (19.8″) NMEA 2000 devicenet cable and connector |
| Housing | 51mm (2″) |
| Usable shaft length | 57mm (2.25″) |
| Hull thickness | 6.3 mm (0.25″) minimum, 54 mm (2 1/8″) maximum |
What’s included
- Blanking plug
Compatibility
The Airmar DT812PV-235-N2 sends depth and temperature data to any NMEA 0183 or NMEA 2000 display. It can run at the same time as other Airmar 50/200 kHz transducers on board without interference, and it accommodates hull thicknesses from 6.3 mm (0.25″) to 54 mm (2 1/8″).






