Description
The Airmar B117-DT-9N is a traditional thru-hull transducer with a 50/200 kHz dual-frequency ceramic element in a low-profile bronze housing. It has a 9-pin connector and sits nearly flush, with only 5 mm (3/16″) outside the hull. Airmar recommends it for boats up to 8 m (25′) long.
Features
- Dual-frequency element: 50 kHz with a 45° beamwidth, performance to 353 m (1,200′); 200 kHz with a 12° beamwidth, performance to 206 m (700′)
- Available for depth only or for depth and temperature
- Rated 600 W
- Right-angle cable exit takes up less room and guards the transducer if it is stepped on
- Included rubber washer lets the hull nut tighten onto irregular hull surfaces
- Low-profile bronze housing with minimal drag
- Airmar also lists plastic P319 and stainless steel SS60 models for other hull materials and deadrise angles
Specifications
| Part number | B117-DT-9N |
| UPC | 801769006223 |
| Model | B117 |
| Element | Dual-frequency, single, ceramic |
| Frequencies | 50/200 kHz |
| Power | 600 W |
| Beamwidth | 45° at 50 kHz; 12° at 200 kHz |
| Performance range | 353 m (1,200′) at 50 kHz; 206 m (700′) at 200 kHz |
| Sensing | Depth only or depth and temperature |
| Connector type | 9-Pin, DT |
| Cable exit | Right-angle |
| Housing | Low-profile bronze |
| Acoustic window | Urethane |
| Extension outside hull | 5 mm (3/16″) |
| Hole diameter | 51 mm (2″) |
| Weight | 0.9 kg (2.0 lb.) |
| Recommended boat length | Up to 8 m (25′) |
| Hull material | Fiberglass or wood |
| Hull deadrise | Best performance through 7°; can accommodate up to 12° |
What’s included
A rubber washer is included.
Listed for
Simrad, Lowrance and B & G equipment.






