Description
The Airmar B117-DT-10F is a depth and temperature transducer that works at 50 kHz and 200 kHz from a single ceramic element. Its low-profile bronze housing sits only 5 mm outside the hull, and a right-angle cable exit gives low headroom. It is listed at 600 W and has a 10-pin connector for Furuno units.
Features
- Dual-frequency operation at 50 kHz and 200 kHz from one single ceramic element
- 50 kHz uses a wide 45° beam, with performance to 353 m (1200′)
- 200 kHz uses a 12° beam, with performance to 206 m (700′)
- Low-profile bronze housing, 5 mm outside the hull
- Right-angle cable exit gives low headroom and protection when the transducer is stepped on
- Rubber washer included for tightening the hull nut on irregular hull surfaces
Specifications
| Part number | B117-DT-10F |
| UPC | 801769006131 |
| Frequencies | 50 kHz and 200 kHz |
| Element | Dual-frequency, single ceramic element |
| Power | 600 W |
| Sensing | Depth and temperature |
| 50 kHz beam | 45° |
| 50 kHz performance | to 353 m (1200′) |
| 200 kHz beam | 12° |
| 200 kHz performance | to 206 m (700′) |
| Housing | Bronze, low profile |
| Extends outside hull | 5 mm |
| Cable exit | Right-angle |
| Connector | 10-pin (Furuno) |
| Acoustic window | Urethane |
| Hole diameter | 51 mm (2″) |
| Weight, bronze | 0.9 kg (2.0 lb) |
| Hull deadrise | Best performance through 7°; can accommodate up to 12° |
| Recommended boat size | Up to 8 m (25′) |
Compatibility
Listed for Furuno units with a 10-pin connector.







