Airmar SS60-20-MM 50/200 kHz Thru-Hull Transducer, 20-Degree Tilt

$393.55 USD

Airmar SS60-20-MM is a stainless steel, low-profile thru-hull fishfinder transducer for 50 kHz and 200 kHz, with a 20-degree tilt and a power rating of 600 watts. It is a Mix and Match base model, so it needs a separate MM cable for your fishfinder.

Ships from manufacturer within 2 weeks

SKU: SS60-20-MM Category: Tags: , , Brand:

Description

The Airmar SS60-20-MM is a standard non-CHIRP fishfinder transducer with a stainless steel housing. It is a low-profile through-hull unit with a 20-degree tilt that works on 50 kHz and 200 kHz. It is a Mix and Match base model, so it connects to your fishfinder through a separate MM cable.

Features

  • Operates at 50 kHz and 200 kHz
  • Power rating of 600 watts
  • Beam width of 45 degrees at 50 kHz and 12 degrees at 200 kHz
  • Stainless steel housing with low-profile through-hull mounting
  • Includes a temperature sensor
  • Mix and Match design: swap to a different MM cable when you change fishfinders, without disturbing the transducer

Specifications

Maker part number SS60-20-MM
Airmar part number 31-704-1-01
Type Standard non-CHIRP fishfinder transducer
Frequency 50 kHz / 200 kHz
Beam width 45 degrees at 50kHz / 12 degrees at 200kHz
Power rating 600 watts
Tilt 20 degrees
Mounting Low-profile through-hull
Housing Stainless Steel
Hull aperture 2.375′ (60mm)
Usable shaft length 2.70′ (68.5mm)
Temperature sensor Yes
Mix and Match Yes
Pigtail cable 2 meters, permanently attached, ends in an Airmar 5-pin female connector

What’s included

  • SS60-20-MM base transducer with its 2 meter pigtail cable, permanently attached
  • Not included: a Mix and Match cable to suit your fishfinder. Installation requires one, and it is sold separately.

Mix and Match cables

Installation requires one of the Mix and Match cables along with the base model. The Mix and Match cables are 9 meters long. Pick the cable that matches your fishfinder, such as MM-DT-LOW for Lowrance/Simrad blue 7-pin, MM-6DT for Garmin 6-pin or MM-10FUR for Furuno 10-pin.