Airmar SS264W 50 khz 12 Degree Thru-Hull Transducer, 10-Pin

$1,689.26 USD

Airmar SS264W 50 khz thru-hull transducer with 12 degrees of tilt, a 25 degree cone and a Furuno 10-pin connector. Single frequency, for boats with 8-16 degrees of deadrise, with around 30 feet of cable.

Ships from manufacturer within 2 weeks

SKU: SS264-12-W5-MM Category: Tags: , Brand:

Description

The Airmar SS264W is a single-frequency 50 khz thru-hull transducer with 12 degrees of tilt and a low profile. It has a 25 degree cone angle and is only for boats with 8-16 degrees of deadrise at the mounting location. Each unit is new old stock in its original box, with the install kit and original mounting accessories.

Features

  • Single-frequency 50 khz element for deep drop use
  • 12 degrees of tilt in a low profile thru-hull design
  • 25 degree cone angle
  • For boats with 8-16 degrees of deadrise at the mounting location
  • No fairing block or pocket mounting needed
  • Similar performance to the low frequency element in the B260/SS260, with a slightly wider beamwidth
  • Mix and match design with a Furuno 10-pin connector

This unit is 50 khz only. Dual frequency needs a second SS264 200 khz transducer, which has been discontinued. Another option is to wire this transducer and your existing one to a transducer switchbox, such as the SB260.

Specifications

Model SS264W
Brand Airmar
Frequency 50 khz
Frequency type Single frequency
Mounting Thru-hull
Element profile Low profile
Tilt angle 12 degrees
Cone angle 25 degree
Deadrise range 8-16 degrees
Connector Furuno 10-pin (mix and match)
Cable length Around 30 feet
Condition New old stock, original box

What’s included

  • SS264W transducer in its original box
  • Install kit
  • Original mounting accessories
  • Original instructions

Works with

It plugs into any Furuno 10-pin unit, or into a 12-pin unit with a 10 to 12 adapter. It fits the DFF1, TZT2 and TZT3.