Description
The Airmar P79-8S is an in-hull depth transducer with an 8-pin Si-Tex connector that reads depth at 50/200 kHz. Its base mounts inside the hull and is bonded to it, so there are no holes to drill and no hull protrusions. The transducer twists into the base, and an adjustable locking ring sets the beam for hull deadrise angles up to 22 degrees.
Features
- Depth only, operating at 50/200 kHz
- No holes to drill and no hull protrusions
- Adjustable locking ring sets the beam for hull deadrise from 2 degrees to 22 degrees
- Recommended for solid fiberglass hulls
- Epoxies to aluminum hulls under 0.38 mm (0.150) thick
- Recommended for planing-hull power boats, trailered boats and rigid inflatable boats
- Boat size: up to 8 m (25′)
Because the transducer sits inside the hull, it suits rigid inflatable boats (RIBs) and racing sailboats.
Specifications
| Part number | P79-8S |
| UPC | 801769012583 |
| Type | In-hull transducer |
| Measurement | Depth only |
| Frequency | 50/200 kHz |
| Power rating | 600W |
| Connector | Si-Tex 8-pin |
| Transducer body | Plastic |
| Deadrise angle | 2 degrees to 22 degrees |
| Recommended hull | Solid fiberglass |
| Aluminum hull | Epoxies to hulls under 0.38 mm (0.150) thick |
| Boat size | Up to 8 m (25′) |
Installation
- Mount the base flange inside the hull.
- Adjust the locking ring to the hull’s deadrise angle.
- Fill the base with propylene glycol anti-freeze.
- Turn and lock the transducer into the base.
Fits
Fits Si-Tex units with an 8-pin connector.






