Airmar P319-DT-BL Plastic Thru-Hull Transducer, 50/200 kHz, 7-Pin

$212.51 USD

Airmar P319-DT-BL plastic thru-hull transducer for depth and temperature readings. It runs at 50/200 kHz, uses a Lowrance/Simrad BL Blue 7-pin connector and is rated 600W.

Ships from manufacturer within 2 weeks

SKU: P319-DT-BL Category: Tags: , , Brand:

Description

The Airmar P319-DT-BL is a plastic thru-hull transducer that works at 50/200 kHz and reads depth and temperature. It uses a Lowrance/Simrad BL Blue 7-pin connector and has a single ceramic element in a low profile housing. The nearly flush design leaves only 5 mm outside the hull, and it comes with a spacer, washer and hull nut.

Features

  • Dual frequency operation at 50/200 kHz from one ceramic element.
  • Built-in temperature sensor for depth and temperature readings.
  • Low profile plastic housing; only 5 mm extends outside the hull.
  • 600W power rating.
  • Hole diameter of 51 mm (2″).
  • Recommended for relatively flat bottoms: 0-7 degrees deadrise gives optimum performance, and it works on deadrises up to 12 degrees.

Specifications

Part number P319-DT-BL
Frequency 50/200 kHz, dual frequency
Element Single ceramic element
Power 600W
Sensor Depth and temperature (built-in temperature sensor)
Connector Lowrance/Simrad BL Blue 7-pin
Housing Plastic, low profile
Mounting Thru-hull
Hole diameter 51 mm (2″)
Extends outside hull 5 mm
Hull deadrise 0-7 degrees recommended; works up to 12 degrees

What’s included

  • P319-DT-BL transducer
  • Hull nut, washer and spacer
  • Installation instructions

Compatibility

The connector is the Lowrance/Simrad BL Blue 7-pin. For newer units with an xSonic transducer connector, use the 000-13313-001 adapter cable.