Description
The Airmar GH2183-10 heading sensor is one compact antenna that supplies GPS position and heading data together, so you don’t need a separate GPS antenna above deck and a heading sensor below deck. Only one above-deck installation is required, which saves installation time and money. The housing protects internal components that are all solid state, with no moving parts.
Features
- Combines GPS positioning and heading data in one housing
- Three-axis solid state compass, accelerometer and rate gyro, temperature compensated across the operating range
- 2° dynamic heading accuracy, held while the vessel pitches and rolls up to 30°
- 1° static heading accuracy when level
- Heading output at 10 Hz on NMEA 0183, adjustable up to 20 Hz on NMEA 2000
- Rate-of-turn and pitch and roll data for precise tilt and turn information
- Outputs NMEA 0183 and NMEA 2000
- Water-proof housing with solid state internal components
Specifications
| Part number | GH2183-10 |
| Brand | Airmar |
| Static compass accuracy | 1° RMS when level |
| Dynamic compass accuracy | 2° RMS |
| Heading display resolution | 0.1° |
| Settling time | 1 second (adjustable) |
| Heading data output update rate | 10 Hz on NMEA 0183; adjustable up to 20 Hz on NMEA 2000 |
| Rate-of-turn range | 0° to 70° per second |
| Rate-of-turn accuracy | 1° per second |
| Pitch and roll range | ±50° |
| Static pitch and roll accuracy | Less than 1° |
| Dynamic pitch and roll accuracy | Less than 3° |
| Pitch and roll display resolution | 0.1° |
| GPS satellites tracked | 14-channel (maximum) |
| GPS position accuracy | 3m (10′) with WAAS (95% of the time, SA off) |
| GPS-fix update rate | 10 x per second |
| Cold start acquisition | More than 52 seconds |
| Supply voltage | 9 VDC to 40 VDC |
| Supply current | Less than 80 mA |
| Power | 1,100 mW |
| NMEA 2000 load equivalency | Number (LEN) 2 |
| Operating temperature range | -25°C to 55°C |
| Storage temperature range | -30°C to 70°C |
Compatibility
The cable is sold separately. The compatible cables listed for this sensor are WS2-C30, WS2-C10, WS2-C06, WS2-C02, WS-CC30, WS-CC15, WS-C45, WS-C35, WS-C25, WS-C15, WS-C10 and WS-C01.






