Airmar B117-DT-9N 50/200kHz Thru-Hull Transducer, 9-Pin

$316.81 USD

Airmar B117-DT-9N is a 50/200 kHz thru-hull transducer with a 9-pin connector and a 600 W rating. Its dual-frequency ceramic element sits in a low-profile bronze housing and extends only 5 mm (3/16″) past the hull.

Ships from manufacturer within 2 weeks

SKU: B117-DT-9N Category: Tags: , Brand:

Description

The Airmar B117-DT-9N is a traditional thru-hull transducer with a 50/200 kHz dual-frequency ceramic element in a low-profile bronze housing. It has a 9-pin connector and sits nearly flush, with only 5 mm (3/16″) outside the hull. Airmar recommends it for boats up to 8 m (25′) long.

Features

  • Dual-frequency element: 50 kHz with a 45° beamwidth, performance to 353 m (1,200′); 200 kHz with a 12° beamwidth, performance to 206 m (700′)
  • Available for depth only or for depth and temperature
  • Rated 600 W
  • Right-angle cable exit takes up less room and guards the transducer if it is stepped on
  • Included rubber washer lets the hull nut tighten onto irregular hull surfaces
  • Low-profile bronze housing with minimal drag
  • Airmar also lists plastic P319 and stainless steel SS60 models for other hull materials and deadrise angles

Specifications

Part number B117-DT-9N
UPC 801769006223
Model B117
Element Dual-frequency, single, ceramic
Frequencies 50/200 kHz
Power 600 W
Beamwidth 45° at 50 kHz; 12° at 200 kHz
Performance range 353 m (1,200′) at 50 kHz; 206 m (700′) at 200 kHz
Sensing Depth only or depth and temperature
Connector type 9-Pin, DT
Cable exit Right-angle
Housing Low-profile bronze
Acoustic window Urethane
Extension outside hull 5 mm (3/16″)
Hole diameter 51 mm (2″)
Weight 0.9 kg (2.0 lb.)
Recommended boat length Up to 8 m (25′)
Hull material Fiberglass or wood
Hull deadrise Best performance through 7°; can accommodate up to 12°

What’s included

A rubber washer is included.

Listed for

Simrad, Lowrance and B & G equipment.