Victron MultiPlus-II 48/4k5/55-32 230V Inverter Charger PMP482405012

$710.95 USD

Victron MultiPlus-II 48/4k5/55-32 230V inverter charger for 48 V battery systems, with 4.0 kW continuous inverter power at 25 °C, up to 55A battery charging and less than 20 ms transfer time.

Ships from manufacturer within 2 weeks

Description

The Victron MultiPlus-II 48/4k5/55-32 230V is a 48 V inverter charger that combines a sine wave inverter, a battery charger and a transfer switch in one housing. It is aimed at marine, mobile, off-grid and grid-connected energy systems, and at home energy storage systems.

Features

  • Continuous inverter output of 4.0 kW at 25 °C, 3.7 kW at 40 °C and 3.0 kW at 65 °C.
  • Time-limited power of 4.5 kW for 2 h, with a 7 kW peak for 1 min.
  • Battery charger rated up to 55A for a 48 V battery system.
  • 32A transfer switch that changes over in less than 20 ms, with UPS-type backup on the main AC output.
  • Second AC output for loads that run only when AC input power is present, such as water heaters.
  • PowerControl limits the input current drawn from the grid or generator; PowerAssist adds battery power at peak loads.
  • Parallel operation of up to six units and three-phase configuration.
  • Set up and monitored with VEConfigure software, GX devices and the VRM Remote Management portal.

Specifications

Part number PMP482405012
Battery voltage 48 V
Continuous inverter power 4.0 kW (25 °C); 3.7 kW (40 °C); 3.0 kW (65 °C)
Time-limited power 4.5 kW for 2 h
Peak power 7 kW (1 min)
AC output voltage 230 V AC ±2 %
AC output frequency 50 Hz ±0.1 % (adjustable to 60 Hz)
Battery charging current Up to 55A
Transfer switch 32A
Transfer time Less than 20 ms
Maximum efficiency 95 %
Operating temperature -40 °C to +65 °C (fan-assisted cooling)
Protection Short circuit, overload, over/under voltage, temperature, DC ripple, anti-islanding
Battery connection M8 bolts
AC connection Screw terminals (13 mm² / 6 AWG)
Parallel operation Up to six units

Compatibility

The Victron MultiPlus-II 48/4k5/55-32 works with off-grid and grid-connected solar systems, alongside solar charge controllers and grid-tie inverters. An optional external AC current sensor or power meter can supply data for managing energy flow.

Monitoring and configuration use GX devices and the VRM Remote Management portal, with VEConfigure software.