Victron MultiPlus-II 24/3000/70-32 Inverter/Charger 24V 3000VA

$787.09 USD

Victron MultiPlus-II 24/3000/70-32 inverter/charger for 24V battery systems, rated 3,000VA with a 70A battery charger and 32A transfer switch. Designed for 230V AC systems, not a direct North American split-phase replacement.

Ships from manufacturer within 2 weeks

SKU: PMP242305010 Category: Tags: , , Brand:

Description

The Victron MultiPlus-II 24/3000/70-32 is a 24V pure sine wave inverter/charger that combines an inverter, a battery charger and an automatic transfer switch in one unit. It is aimed at off-grid solar, marine and mobile power setups, and at compatible energy storage systems. It is designed for 230V AC systems and does not directly replace a North American residential split-phase inverter.

Features

  • Pure sine wave inverter rated at 3,000VA, with 2,400W continuous active power at 25°C
  • Peak power of 5,500W
  • Integrated battery charger with a maximum battery charge current of 70A at up to 25°C ambient
  • 32A automatic transfer switch with a transfer time of less than 20ms
  • PowerControl limits AC input demand, and PowerAssist adds battery energy when incoming AC power is limited
  • Main AC output continues through the inverter when enough battery energy is available; the 32A auxiliary output works only when external AC input is present
  • No integrated solar charge controller: solar charging needs compatible external equipment
  • Remote monitoring through Victron VRM when a compatible GX device has an internet connection

Specifications

Part number (MPN) PMP242305010
Model MultiPlus-II 24/3000/70-32
Nominal battery voltage 24V DC
Inverter rating 3,000VA
Continuous active power at 25°C 2,400W
Peak power 5,500W
Maximum battery charge current 70A
Transfer switch rating 32A
Transfer time Less than 20ms
AC output 230V AC, single-phase
Output frequency 50Hz ±0.1%; adjustable to 60Hz
DC input voltage range 19–33V DC
AC input voltage range 187–265V AC
AC input frequency 45–65Hz
Maximum AC input current 32A
Zero-load power 13W
Parallel operation Up to 6 compatible units, subject to Victron configuration requirements
Battery connection M8 bolts
AC connection Screw terminals, 13mm² (6 AWG)
Dimensions (H × W × D) 499 × 268 × 141 mm (approximately 19.65 × 10.55 × 5.55 inches)
Enclosure material Steel
Colour Blue, RAL 5012
Cooling Fan-assisted
Operating temperature -40°C to +65°C

Compatibility

The Victron MultiPlus-II 24/3000/70-32 is designed for 230V AC systems. The listed supporting accessories are Victron Cerbo GX, VE.Bus Smart Dongle, Digital Multi Control Panel and MK3-USB interface.

  • Bluetooth monitoring needs the optional VE.Bus Smart Dongle; the unit has no integrated Wi-Fi or Bluetooth.
  • Solar: compatible with Victron MPPT solar charge controllers and AC-coupled solar inverters; solar panels cannot connect directly to the PV input.
  • Lithium: can operate with compatible lithium battery systems when properly configured with the required battery management and communication equipment; check with the battery maker.
  • Expansion: up to 6 compatible units in parallel, or three matched units for three-phase, subject to Victron configuration requirements.
  • An optional external AC current sensor rated 50A or 100A is available.

Monitoring accessories and communication interfaces come separately unless a bundle includes them.