Description
Victron Orion-TR ORI482441110 is an isolated DC-DC converter with a 48 VDC input and a 24 VDC output. Its input range is 40-70 V, and it gives 16 A of continuous output at 40 °C. Victron says it is not intended for battery charging.
Features
- Victron Orion-TR ORI482441110 is an isolated model, with separate input and output (-) leads.
- The remote on/off terminal can be operated with a low power switch, such as the engine run/stop switch, so no high current switch is needed in the input wiring.
- Victron says all models are short circuit proof, and an unlimited number of units can be connected in parallel to increase output current.
- High temperature protection: the output current is reduced at high ambient temperatures.
- IP43 protection when installed with the screw terminals oriented downward.
- Screw terminals, and no special tools are needed for installation.
- Adjustable output voltage, 20-30 V.
Specifications
| Model | Orion-TR 48/24-16A (380W) |
| Part number | ORI482441110 |
| UPC | 8719076038887 |
| Input voltage range | 40-70 V |
| Nominal output voltage | 24.2 V |
| Output voltage adjust range | 20-30 V |
| Continuous output current at nominal output voltage and 40 °C | 16 A |
| Maximum output current (10 S) at nominal output voltage | 25 A |
| Short circuit output current | 40 A |
| Continuous output power at 25 °C | 430 W |
| Continuous output power at 40 °C | 380 W |
| Efficiency | 89 % |
| No load input current | < 80 mA |
| Galvanic isolation | 200 VDC between input, output, and case |
| Operating temperature range | -20 to +55 °C (derate 3 % per °C above 40 °C) |
| Humidity | Max. 95 % non-condensing |
| IP rating | IP43 (when installed with the screw terminals oriented downward) |
| DC connection | Screw terminals |
| Maximum cable cross-section | 16 mm² AWG6 |
| Weight | 1.6 kg (3.5 lb) |
| Dimensions (H x W x D) | 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch) |
| Safety standards | EN 60950 |
| Emission standards | EN 61000-6-3, EN 55014-1 |
| Immunity standards | EN 61000-6-2, EN 61000-6-1, EN 55014-2 |
| Automotive directive standards | ECE R10-5 |







