Description
Victron Orion-TR 24/24-12 is an isolated DC-DC converter that takes a 24 VDC input and gives a 24 VDC output. Its input range is 16-35 V, and its output voltage can be adjusted from 20 to 30 V. It is rated 280 W continuous at 40 °C and is not intended for battery charging.
Features
- Galvanic isolation of 200 VDC between input, output and case.
- Remote on/off terminal: a low-power switch, such as an engine run/stop switch, can control it instead of a high-current switch in the input wiring.
- An unlimited number of units can be connected in parallel to increase output current.
- Output current is reduced at high ambient temperatures; operating range is -20 to +55 °C.
- IP43 protection when installed with the screw terminals oriented downward.
- Screw terminals; no special tools are needed for installation.
- Input voltage range of 16-35 V, with under voltage shut down at 14 V and restart at 15 V.
- Output voltage adjustable from 20 to 30 V.
Specifications
| Part number | ORI242428110 |
| UPC | 8719076035268 |
| Brand | Victron Energy |
| Input voltage range | 16-35 V |
| Nominal output voltage | 24.2 V |
| Output voltage adjust range | 20-30 V |
| Cont. output current at nominal output voltage and 40 °C | 12 A |
| Cont. output power at 40 °C | 280 W |
| Cont. output power at 25 °C | 320 W |
| Maximum output current (10 S) at nominal output voltage | 15 A |
| Short circuit output current | 30 A |
| Under voltage shut down | 14 V |
| Under voltage restart | 15 V |
| Efficiency | 89 % |
| No load input current | < 80 mA |
| Galvanic isolation | 200 VDC between input, output, and case |
| Operating temperature range | -20 to +55 °C (derate 3 % per °C above 40 °C) |
| Humidity | Max. 95 % non-condensing |
| DC connection | Screw terminals |
| Maximum cable cross-section | 16 mm² AWG6 |
| Weight | 1.3 kg (3 lb) |
| Dimensions (H x W x D) | 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch) |
| Protection rating | IP43 (when installed with the screw terminals oriented downward) |
| Safety standards | EN 60950 |
| Automotive directive standards | ECE R10-5 |









