Victron Energy Orion-TR 12/24-15A DC Converter 360W Isolated ORI122441110

$178.57 USD

Victron Energy Orion-TR 12/24-15A DC converter, model ORI122441110, with a 15A continuous output rating, 360W at 40°C, and IP43 protection when installed with screw terminals downwards. It is isolated and can be paralleled.

Ships from manufacturer within 2 weeks

SKU: ORI122441110 Category: Tags: , , Brand:

Description

The Victron Energy Orion-TR 12/24-15A is an isolated DC converter, model ORI122441110, rated 15A continuous output and 360W at 40°C. It takes a 10-17V input and its output voltage can be adjusted between 20V and 30V. It has screw terminals for the DC connections and weighs 1.8kg.

Features

  • Remote on/off removes the need for a high current switch in the input wiring; a low power switch can operate it.
  • Output voltage is adjustable, so the unit can also charge a 12V starter or accessory battery in an otherwise 24V system.
  • Short circuit proof; units can be paralleled to increase output current, and Victron says an unlimited number can be connected in parallel.
  • IP43 protection when installed with the screw terminals oriented downwards.
  • Screw terminals; Victron says no special tools are needed for installation.
  • The Orion-TR 12/24-15A is listed at 430W continuous output at 25°C and 360W at 40°C, with 88% efficiency.
  • Output noise of 2 mV rms and output voltage tolerance of +/- 0.2V.

Specifications

Part number (MPN) ORI122441110
UPC 8719076038878
Input voltage range 10-17V
Nominal output voltage 12.2V
Output voltage adjust range 20-30V
Output voltage tolerance +/- 0.2V
Output noise 2mV rms
Continuous output current at nominal output voltage and 40°C 15A
Maximum output current (10 s) at nominal output voltage minus 20% 25A
Short circuit output current 40A
Continuous output power at 25°C 430W
Continuous output power at 40°C 360W
Efficiency 88%
Off load current < 100mA
Operating temperature range -20 to +55°C (derate 3% per °C above 40°C)
Humidity Max. 95% non-condensing
DC connection Screw terminals
Maximum cable cross-section 16 mm² (AWG6)
Ingress protection IP43 when installed with screw terminals oriented downwards
Weight 1.8kg
Dimensions 130 x 186 x 80 mm (5.1 x 7.3 x 3.2 inch)
Safety standard EN 60950
Emission standards EN 61000-6-3, EN 55014-1
Immunity standards EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive directive ECE R10-5