Description
The Victron Lynx Smart BMS 500 NG (M10) is a battery management system (BMS) designed for Victron Lithium NG batteries, which use lithium iron phosphate (LiFePO4) technology. It can manage battery banks wired in series, in parallel or in series/parallel for 12V, 24V or 48V systems, with up to 50 batteries in one system. It carries a built-in 500 A contactor and integrates with other M10 Lynx products.
Features
- Built-in 500 A contactor, usable as a remote-controllable main system switch.
- Pre-charge circuit limits high inrush currents when connecting capacitive loads such as inverters, with no external pre-charging device.
- Works as a secondary safety system that protects the battery if the primary controls (ATC, ATD, and/or DVCC) fail.
- Bluetooth monitoring and control via the VictronConnect App, or VE.Can with GX devices (Cerbo GX, Ekrano GX) and the VRM portal.
- Built-in battery monitor reports state of charge, voltage, current and historical data in real time.
- Programmable relay works as an alarm relay (with the pre-alarm) or controls an alternator via its external regulator (ignition cable).
- AUX terminal supplies 1.1 A at system voltage for loads such as a GX device after BMS shutdown.
- Monitors fuse status of up to 4 connected Lynx Distributors via VictronConnect or GX devices, and raises alarms for blown fuses.
Specifications
| Part number | LYN034160310 |
| Continuous contactor rating | 500 A continuous |
| Peak contactor rating | 600 A for 5 minutes |
| Battery voltage range | 9 – 60 VDC |
| Maximum input voltage | 75 VDC |
| Supported system voltages | 12, 24, or 48V |
| Reverse polarity protection | No |
| Busbar | M10 (Torque: 33 Nm) |
| Busbar material | Tinned copper |
| Busbar dimensions (H x W) | 8 x 30 mm |
| VE.Can | RJ45 |
| AUX output maximum current | 1.1 A continuous, protected by resettable fuse |
| Alarm relay (SPDT) maximum current | 2 A at 60 VDC |
| Power consumption, OFF mode | 0.3 mA for all system voltages |
| Power consumption, standby mode | Approximately 0.6 W (50 mA at 12 V) |
| Enclosure material | ABS |
| Enclosure dimensions (H x W x D) | 190 x 180 x 80 mm |
| Unit weight | 1.9 kg |
| Protection class | IP22 |
| Humidity | Max. 95 % (non-condensing) |
| Operating temperature range | -40 °C to +60 °C |
| Storage temperature range | -40 °C to +60 °C |
| Safety standard | EN-IEC 63000:2018 |
| EMC standard | EN-IEC 61000-6-3:2007/A1:2011/AC:2012 |
Compatibility
- The Victron Lynx Smart BMS is designed specifically for Victron Lithium NG batteries, which come in 12.8 V, 25.6 V and 51.2 V variants.
- Its M10 busbar can be combined with all M10 Lynx products.
- Compatible Victron inverter/chargers, the Orion XS 12/12-50A DC-DC battery charger, and solar charge controllers are controlled automatically via a connected GX device and DVCC.
- ATC/ATD contacts can be used to control other chargers and loads that have a remote on/off port.
- Integration into marine networks via NMEA 2000 requires a VE.Can to NMEA 2000 micro-C male cable.





