Description
The Cyrix-ct battery combiner from Victron Energy, part CYR010120011, is an intelligent relay that parallel-connects a lead-acid starter battery and a LiFePO4 battery in 12V or 24V systems. It is rated for 120A continuous current and breaking capacity, and it works with a VE.Bus BMS to decide when the batteries connect or separate based on battery voltage and BMS status. Listed uses include dual-battery, marine, RV and alternator-charging setups.
Features
- 120A continuous current and breaking capacity, stated for both 12V and 24V systems
- Parallel-connects a lead-acid starter battery and a LiFePO4 battery in compatible 12V or 24V systems
- Connects when the BMS permits charging and at least 13.4V (12V) or 26.8V (24V) is sensed on a power terminal
- Disconnects on BMS cell overvoltage or overtemperature, or when voltage falls below 13.2V (12V) or 26.4V (24V)
- Start Assist: a short positive control pulse closes the relay for 30 seconds
- Built-in transient voltage suppressor limits voltage spikes when the Cyrix disengages suddenly
- Draws less than 4 mA when the relay is open
- IP54 protection rating for the compact enclosure
Specifications
| Manufacturer | Victron Energy |
| Model / SKU | CYR010120011 |
| Product Name | Cyrix-Li-ct 12/24-120 |
| Product Type | Intelligent Li-ion Battery Combiner / Battery Relay |
| System Voltage | 12V / 24V |
| Continuous Current | 120A |
| Breaking Capacity at 12V / 24V | 120A |
| Control Input | High: Cyrix Engages / Free-Floating or Low: Cyrix Disengages |
| 12V Connect Threshold | 13.4V |
| 24V Connect Threshold | 26.8V |
| 12V Disconnect Threshold | Below 13.2V |
| 24V Disconnect Threshold | Below 26.4V |
| Start Assist | Yes – 30 Seconds |
| Open-State Current Consumption | <4 mA |
| Protection Category | IP54 |
| Dimensions (H × W × D) | 1.8 × 1.8 × 3.2 in |
| Weight | 0.24 lb |
| BMS Compatibility | VE.Bus BMS Control |
| Battery Application | Lead-Acid Starter Battery + LiFePO4 Battery |
| Transient Voltage Suppression | Built-In |
Compatibility
The Cyrix-ct works with the Charge Disconnect output of a compatible VE.Bus BMS, which helps protect lithium battery cells from overvoltage and excessive temperature. It is described for compatible 12V or 24V electrical systems and for Victron LiFePO4 battery installations that use VE.Bus BMS control.









