Description
Victron Energy CCH012040000 is the Centaur 12/40, a 12 VDC battery charger with a 40 A charge current. It has three isolated outputs, so one unit can charge three battery banks at the same time. It accepts 90 – 265 VAC input or a 90 – 400 VDC supply, and uses three-stage charging.
Features
- Three isolated outputs, each able to supply the full rated current.
- Auto-ranging 90 – 265 VAC input at 50 or 60 Hz, with no adjustment needed.
- Also accepts a 90 – 400 VDC supply for AC-DC and DC-DC operation.
- Three-stage charging: bulk until output drops to 70% of rated amps, then a 4 hour timer before float.
- Temperature compensation of charge voltage, with a DIP switch to select settings for flooded lead-acid, gel or AGM batteries.
- Aluminum epoxy powder-coated case with drip shield and stainless steel fixings.
- Temperature and current controlled fan, with protection against output short circuit and over temperature.
Specifications
| Part number | CCH012040000 |
| Model | Centaur 12/40 |
| Charge current | 40 A |
| Input voltage (VAC) | 90 – 265 VAC |
| Input voltage (VDC) | 90 – 400 VDC |
| Input frequency | 45 – 65 Hz |
| Power factor | 1 |
| Charge voltage absorption | 14,3 VDC |
| Charge voltage float | 13,5 VDC |
| Output banks | 3 |
| Total output ammeter | Yes |
| Charge characteristic | IUoU (three stage charging) |
| Recommended battery capacity | 160 – 400 Ah |
| Temperature sensor | Internal, -2 mV/°C (-1 mV/°F) per cell |
| Forced cooling | Yes, temperature and current controlled fan |
| Protection | Output short circuit, over temperature |
| Ignition protected | Yes |
| Operating temp. range | -20 to 60°C (0 – 140°F) |
| Humidity (non condensing) | Max 95% |
What’s included
- Centaur battery charger
- Installation hardware
- Owner’s manual











