Victron BAM030710100 BMV-710H Smart Battery Monitor 60-385VDC

$523.15 USD

Victron BAM030710100 BMV-710H Smart battery monitor with a 60 – 385 VDC supply range, built-in Bluetooth and a 500 A/50 mV shunt. It tracks state of charge, ampere hours consumed and time to go.

Ships from manufacturer within 2 weeks

SKU: BAM030710100 Category: Tags: , , Brand:

Description

Victron BAM030710100 is the BMV-710H Smart battery monitor, with a supply voltage range of 60 – 385 VDC. It works out a battery’s state of charge and keeps count of the ampere hours consumed by integrating the current flowing into and out of the battery. Bluetooth is built in, so a phone or tablet can read the monitored values through the VictronConnect app.

Features

  • Shows battery voltage, current, power, ampere-hours consumed and state of charge
  • Shows the remaining time at the current rate of discharge
  • Programmable visual and audible alarm
  • Programmable relay that can switch off non-critical loads or run a generator when needed
  • 500 A quick connect shunt and connection kit, with shunt selection capability up to 10,000 amps
  • VE.Direct communication port
  • Keeps a long log of historical events for reviewing usage patterns and battery health
  • Wide input voltage range of 6.5 – 95V and current measurement resolution of 10 mA (0.01A)

Specifications

Specifications for the Victron BAM030710100 are below. Accuracy figures are given with a 500 A shunt.

Part number BAM030710100
Model BMV-710H Smart
Supply Voltage Range 60 – 385 VDC
Input Voltage Range 6.5 – 95V
Battery Capacity (Ah) 1 – 9999 Ah
Current Draw, Back Light Off < 4mA
Low Current Consumption 2.9Ah per month (4mA) @12V and 2.2Ah per month (3mA) @ 24V
Current Measurement Resolution 10 mA (0.01A)
Accuracy of Current Measurement ± 0.4%
Accuracy of Voltage Measurement ± 0.3%
Shunt (included) 500A / 50mV
Shunt Selection Capability Up to 10,000 amps
Relay 60V / 1A normally open (function can be inverted)
VE.Direct Communication Port Yes
Operating Temperature Range -40 +50°C (-40 – 120°F)
Installation Flush mount
Front diameter 63mm
Front bezel 69 x 69 mm (2.7 x 2.7 inch)
Body diameter and depth 52 mm (2.0 inch) and 31 mm (1.2 inch)
Shunt connection bolts M10 (0.3937 inch)
Protection Category IP55 (not intended for outdoor use)
Safety EN 60335-1
Emission / Immunity EN 55014-1 / EN 55014-2
Automotive ECE R10-4 / EN 50498

What’s included

  • Round head unit
  • Square bezel overlay
  • Securing ring for rear mounting and screws for front mounting
  • 10 meter 6 core UTP cable with RJ12 connectors
  • Battery cable (2m) with a 1 Amp slow blow fuse for the ‘+’ connection
  • 500 A/50 mV shunt, housed in a special enclosure because of the high voltage application

Not included / sold separately: the optional temperature sensor (ASS000100000). The page says the smartphone app needs a Bluetooth Smart Dongle, which is not in the list above.