Description
The Atlantic Diesel Stove from Dickinson is a diesel-burning cookstove with a cast iron cooktop, and it is Dickinson’s largest stove. This 00-ATL-12-1T version is the Atlantic with a one-turn hot water coil, which can heat 5-10 gallons of water. It provides dry heat, and installation notes for sailboats and chimneys are listed below.
Features
- Cast iron cooktop for cooking.
- Produces dry heat, which Dickinson says removes moisture inside the vessel.
- Laser-cut design in 304 stainless steel.
- Includes a 12v fan for start-up and draft assistance.
- Valve is factory set for #2 diesel; valves for kerosene and #1 diesel are also available.
- Sailboat installation: the stove must face fore or aft. For port or starboard facing, mount the valve on the side, especially on heels up to 15 degrees.
- One-turn hot water coil option, which can heat 5-10 gallons of water.
Specifications
| Part number | 00-ATL-12-1T |
| UPC | 814901012273 |
| Width | 30.50″ |
| Height | 28.75″ |
| Depth | 23″ |
| Weight | 189 lbs. |
| Oven width | 16” |
| Oven depth | 14.5” |
| Oven height | 12” |
| Heat output, low | 8125 BTU |
| Heat output, high | 24375 BTU |
| Fuel consumption, low (24hr) | 1.89 gal |
| Fuel consumption, high (24hr) | 4.50 gal |
| Factory fuel setting | #2 diesel |
| Draft assist fan | 12v |
| Hot water coil (one-turn) | 5-10 gallons |
What’s included
The stove includes a 12v fan for start-up and draft assistance.
Installation requirements
- Requires 5” diameter chimney parts.
- Ideal chimney length is 6ft with no elbows; a minimum of 4ft and a maximum of 8ft is required.
- For chimneys 6ft or longer, a barometric damper is highly recommended.
- A permanent fresh air vent is needed in the room where the unit is installed.








