Simrad AP44 VRF Autopilot System Pack MK2 Medium Capacity

$3,004.78 USD

The Simrad AP44 VRF Autopilot System Pack MK2 is a medium capacity autopilot for hydraulic-steered outboard and sterndrive boats up to 10 m (35′). It includes the NAC-2 computer, AP44 controller, Precision-9 compass and PUMP-2 hydraulic pump.

Ships from manufacturer within 2 weeks

SKU: SIM000-13291-002 Category: Tags: , , Brand:

Description

The Simrad AP44 VRF autopilot is a complete medium capacity system pack for hydraulic-steered outboard and sterndrive (inboard/outboard) boats up to 10 m (35′) in length. It includes the parts needed to build a Simrad Continuum autopilot system: the NAC-2 computer, AP44 controller, Precision-9 compass, PUMP-2 hydraulic pump and NMEA 2000 cables. It is suitable for low-current hydraulic steering pumps, mechanical drive units and solenoid valves.

Features

  • Built for hydraulic-steered outboard and sterndrive boats up to 10 m (35′) in length.
  • AP44 controller with a 4.1″ optically bonded colour display, rotary and button controls, and access to advanced pilot modes.
  • Steering modes: Heading, No Drift, Waypoint Steering (NAV), Wind and Power Steer (FU).
  • Virtual Rudder Feedback, so no separate mechanical rudder feedback unit needs to be installed.
  • Automatic tuning for optimal auto-steering performance.
  • Precision-9 solid-state compass gives heading and rate-of-turn from sensors that measure motion on nine axes.
  • PUMP-2 reversible hydraulic gear pump for cylinder displacement of 80-250 cc.
  • No Drift and depth contour tracking need an optional GPS receiver and depth transducer, both sold separately.

Specifications

Part Number 000-13291-002
UPC 9420064128211
Boat length Up to 10 m (35′)
Steering Hydraulic-steered outboard and sterndrive (inboard/outboard) boats
PUMP-2 cylinder displacement 80-250 cc
Controller display size 4.1″
Controller display resolution 320 x 240
Controller screen brightness 600 nits
Controller supply voltage 12V DC
Controller power consumption typical 1.35 W
Controller power consumption max 1.8 W
Controller water rating IPx7
Controller operating temperature range -40° F to 185° F
Controller dimensions (WxHxD) 4.6″ x 4.5″ x 1.9″
NAC-2 supply voltage 9-31.2 V DC
NAC-2 water resistance IPX5
NAC-2 power consumption 140 mA @ 12 V (1.7 W) + drive unit load
NAC-2 operating temperature -13° F to 131° F
NAC-2 dimensions (WxHxD) 8.03″ x 8.15″ x 2.24″
Compass power supply 12V DC via NMEA 2000
Compass waterproof rating IPX7
Compass dimensions (WxHxD) 4.69″ x 1.42″ x 4.69″
Compass heading accuracy ±2° after calibration
Compass repeatability ±1.0° (or better)
Compass pitch/roll angle ±45°

What’s included

  • AP44 Autopilot Controller with N2K cable 0.6 m (2′), N2K T-joiner, sun cover and install kit
  • NAC-2 Autopilot Computer with N2K cable 0.6 m (2′), N2K T-joiner, NAC-1 & NAC-2 rudder feedback cable, power cable and drive cable
  • Precision-9 Compass with N2K T-joiner and N2K cable 4.5 m (15′)
  • N2K Power Cable Kit with N2K T-joiner and N2K terminator kit (male and female terminators)
  • 12V 0.8L PUMP-2 Autopilot Pump

Not included: the GPS receiver for No Drift and the depth transducer for depth contour tracking, both sold separately.