Description
The B&G NAC-3 Autopilot Computer is the control computer for a B&G autopilot system. It houses the electronics that run a hydraulic steering pump or a mechanical drive unit, and it connects to heading sensors and rudder feedback units. It is recommended for boats above 10 metres (35 feet) in length.
Features
- Recommended for boats above 10 metres (35 feet) in length
- High-current output of 30 amps continuous and 50 amps peak
- Clutch output rated at 3 amps maximum
- Virtual rudder feedback for simplified installation on outboard and sterndrive (inboard/outboard) boats
- Supports RF25 rudder feedback units over SimNet or NMEA 2000, and variable frequency sensors such as the RF300
- NMEA 2000 connectivity to heading sensors, rudder feedback units, autopilot controllers and multifunction displays
- NMEA 0183 input
- Runs the B&G Reflex steering algorithm
Specifications
| Part number | 000-13250-001 |
| UPC | 9420024154397 |
| Recommended boat length | above 10 metres (35 feet) |
| Continuous output | 30 amps |
| Peak output | 50 amps peak (1 sec.) |
| Clutch output | 3 amps maximum |
| Drive output | 12/24VDC; reversible motor control 30A, 50A peak (1 sec.) |
| Solenoid control | 10A (min. 10mA) |
| Supply voltage | 12/24VDC +30 -10% |
| Recommended fuse rating | Internal fuse 30A (Slow) |
| Power consumption max | 750W |
| Power consumption typical | 100mA + drive load |
| Compass sensor support | NMEA2000, NMEA0183 |
| Rudder sensor support | RF300, RF45X, RF25N, RF70 & VRF |
| NMEA 2000 connectivity | 1x CAN terminal, 1 LEN |
| Operating temperature range | -15 to +55C (5 to 131F) |
| Storage temperature range | -30C to +70C (-22F to +158F) |
| Ingress protection rating | IPx2 |
| Dimensions W x H x D | 204 x 190 x 57mm (8.1 x 7.5 x 2.2 inches) |
| Weight | 0.7 kg (1.6 lbs) |
| Mounting type | Bulkhead |
| Compass safe distance | 0.5 m (20 inches) |
What’s included
- N2K-T-RD Network T-Connector
- N2KEXT-2RD 2ft Network Extension Cable
Compatibility
The NAC-3 is suitable to operate high-current drive pumps including the Simrad RPU160 and RPU300, mechanical drives such as the Simrad DD15, hydraulic linear drives such as the HLD2000 series, and solenoid valves. Rudder sensors it supports include the RF300, RF45X, RF25N, RF70 and VRF.






