Description
The Navico 000-11517-001 Fuel Flow Sensor Pack is a fuel flow sensor for a gasoline engine, and it tracks how much fuel the engine uses. It reports Fuel Flow, Tank Fuel Used, Trip Fuel Used and Seasonal Fuel Used. The sensor has a 10-foot cable and comes with an N2K T-connector to join it to a NMEA 2000 network.
Features
- Reports fuel flow, tank fuel used, trip fuel used and seasonal fuel used
- Built for gasoline engines only; it does not operate diesel engine fuel systems
- Comes with a 10-foot cable
- Includes an N2K T-connector for a NMEA 2000 network
- Supports up to 3 engines, with one sensor required per engine
- Installs above the fuel tank’s maximum level, in-line after the fuel filter and any Y’s or T’s
- Optimized for flow rates of 0.6-45 Gal/hr, and can measure outside that range
Specifications
| Part number | 000-11517-001 |
| UPC | 9420024129852 |
| Brand | Navico |
| Cable length | 10-foot |
| Fuel type | Gasoline only |
| Engines supported | Up to 3; one sensor required per engine |
| Outputs | Fuel Flow, Tank Fuel Used, Trip Fuel Used, Seasonal Fuel Used |
| Network | NMEA 2000 |
| Flow rate measured | Optimized for 0.6-45 Gal/hr but can measure outside these values |
| Added back pressure | 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr |
| Fuel line diameter | 3/8″ (9.5mm) Inside Diameter |
| Bulkhead hole | 22mm (7/8″) |
| Installation location | Above the max level of the fuel tank, in-line after the fuel filter and any Y’s or T’s in the line |
| Box dimensions | 2″H x 4″W x 10″L |
| Weight | 0.6 lbs |
What’s included
The Navico 000-11517-001 Fuel Flow Sensor Pack comes with:
- Fuel flow sensor
- N2K T-connector
- Two 1″ hose clamps
“







