Description
The Simrad 000-10907-001 is a rotary mechanical autopilot drive for smaller powerboats fitted with mechanical push-pull cable steering. It includes a drive motor, solenoid clutch and integrated frequency rudder feedback (RFB) capability, and it replaces the existing manual steering helm. The unit sits completely hidden behind the dash for a tidy installation.
Features
- Replaces the existing manual steering helm on boats with mechanical push-pull cable steering.
- Includes a drive motor, solenoid clutch and integrated frequency rudder feedback (RFB) capability.
- Mounts totally concealed behind the dash.
- Suits standard straight shaft configurations.
- Built on the Morse 290 rotary helm unit, it accepts Morse 304411 and Teleflex SSC52 rotary cables without modification.
- Produces a maximum cable push/pull of 136 kg.
Specifications
| Brand | Simrad |
| Part Number | 000-10907-001 |
| UPC | 9420024121153 |
| Type | Rotary mechanical autopilot drive |
| Steering system | Mechanical push-pull cable |
| Shaft configuration | Standard straight shaft |
| Maximum cable push/pull | 136 kg |
| Recommended maximum boat speed | 65 km/h (40 mph) |
| Steering load limit | 7 kg force on the rim of a 35 cm diameter steering wheel to hold a course (1.2 kgm of torque) |
| Autopilot computers | NAC-3, legacy AC12/42 |
| Rotary cables accepted without modification | Morse 304411, Teleflex SSC52 |
| Base unit | Morse 290 rotary helm unit |
Compatibility
Check these points against your boat before fitting the Simrad 000-10907-001.
- Suitable for use with NAC-3 and legacy AC12/42 autopilot computers.
- Recommended for boats with a maximum speed of 65 km/h (40 mph). Should not be fitted to boats that can exceed this speed.
- Should not be fitted to boats where the engine max horsepower exceeds the max horsepower rating on the boat manufacturer’s tag.
- Teleflex Safe T, Teleflex Big T, Uflex T71, Uflex T73NR or Uflex T81 steering: a cable adapter must be fitted to the cable before installing the drive.
- Rack and pinion steering: the drive can be used, but the steering cable must also be replaced with a Morse 304411 or Teleflex SSC52.
- If steering wheel input torque exceeds 7 kg force on the rim of a 35 cm diameter steering wheel (1.2 kgm of torque), a hydraulic linear actuator drive system is recommended.
- Non feedback (NFB) steering: the drive can be fitted, but the helm person should be formally familiarized with the new helm’s operating characteristics.






