Cold Cure is a blush resistant, two-part epoxy laminating and coating resin that excels in foul weather conditions. It cures in cold, damp, and humid environments while remaining resistant to water spotting.
Use it in marine and woodworking applications. Cold Cure can be mixed with various fillers to create filleting and fairing compounds for marine applications. Adding silica thickener produces a general duty woodworking adhesive.
- Features a convenient 2:1 mixing ratio.
- Cures in cold, damp conditions down to as low as 35°F (2°C)
- Compatible with most primers and paints
- Contains no VOC’s
- Chemical resistant
|Mix Ratio by Volume||100:50|
|Mix Ratio by Weight||100:48|
|Mixed Viscosity||1,660 cps|
|Tensile Strength||6,000 psi|
|Compressive Strength||12,000 psi|
|Coverage||See Product Usage Estimations Chart|
|Minimum Application Temperature||35°F (2°C)|
|Maximum Service Temperature||162°F (72°C)|
|Gel Time @ 77°F (25°C)||45 Minutes (100g mixture)|
|Tack Free Time Thin [email protected] 77°F (25°C)||24 Hours (100g mixture)|
|Full Cure @ 77°F (25°C)||72 Hours|