System Three Clear Coat Expoxy Resin


SKU: N/A Category:


Clear Coat is an extremely low viscosity, water white, “penetrating” epoxy system. Clear Coat cures to a brilliantly clear, very tough finish without the usual “amine blush” associated with some epoxy resin films. Clear Coat contains no volatile solvents.

A two part epoxy coating and laminating resin for use in marine and woodworking applications. Use as a sealer, topcoat, or saturation coat.

  • Features a convenient 2:1 mixing ratio.
  • A clear, almost water-white, solvent-free epoxy system.
  • Cures to a clear, glossy, blush-free surface.
Mix Ratio by Volume100:50
Mix Ratio by Weight100:43
Total Solids100%
Mixed Viscosity380 cps
Minimum Application Temperature50°F (10°C)
Tensile Strength, psi7,800
Tensile Elongation at Break8%
Flexural Strength, psi12,000
Flexural Modulus, psi375,000
Compressive Strength, psiYield 13,000
CoverageSee Product Usage Estimations Chart
Gel Time @ 77°F (25°C)60 Minutes (100g mixture)
Tack FreeTime Thin Film @ 77°F (25°C)24 Hours
Full Cure @ 77°F (25°C)72 Hours


Additional information


1.5 Pint, 1.5 Quart, 1.5 Gallon