Description
The Airmar P79-8G is an in-hull depth only transducer with an 8-pin connector for Garmin sounders. It is 600 W, operates at 50 to 200 kHz, and mounts inside the hull with no holes to drill and no hull protrusions. Its adjustable base adjusts to hull deadrise angles up to 22 degrees.
Features
- Mounts inside the hull with no holes to drill and no hull protrusions
- Adjustable base for hull deadrise angles up to 22 degrees, keeping the beam vertical
- Liquid-filled base: the transducer twists into the bonded base and locks
- Base is filled with propylene glycol antifreeze during installation
- Depth only, standard imaging, no chirp
- Recommended for solid fibreglass hulls up to 5/8″ thick; not for cored hulls
- Recommended for planing-hull power boats, trailered boats and rigid inflatable boats
Specifications
| Part number | P79-8G |
| Manufacturer | Airmar |
| Mounting style | In-Hull |
| Function | Depth only |
| Power | 600 W |
| Operating frequency | 50 to 200 kHz |
| Beamwidth | 45 to 12 degrees |
| Depth | 800 to 1,200 ft |
| Deadrise angle adjustment | Up to 22 degrees |
| Connector | 8-pin, for Garmin units |
| Pins | 8 |
| Cable length | 25′ |
| Maximum fibreglass hull thickness | 5/8″ |
| Imaging | Standard |
| Chirp | No |
| Speed sensor included | No |
| Temperature sensor | No |
What’s included
- Transducer kit
- Installation instructions
Fits
Fits Garmin units with an 8-pin connector. When used with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.






