Description
The Airmar MM-8G is an 8m adapter cable from the Mix & Match range for 600W Non-CHIRP transducers. One end has an Airmar 5-pin male connector and the other has the connector for a specific brand of electronics. Because the adapter can be swapped, you can change equipment brands later and leave the transducer in place.
Features
- 8m adapter cable, joined to a 2m transducer pigtail
- Airmar 5-pin male connector at one end, brand-specific connector at the other
- Swap the adapter cable to change equipment brands and keep the transducer
- Transducer and adapter cable are both needed for installation
- For Mix and Match 600W transducers; cannot be used with 1kw transducers
Specifications
| Brand | Airmar |
| Manufacturer part number | MM-8G |
| UPC | 801769003048 |
| Type | Adapter cable |
| Adapter cable length | 8m |
| Transducer pigtail length | 2m, attached to the transducer |
| Pigtail connector | Airmar 5-pin female |
| Connector on Airmar end of adapter | Airmar 5-pin male |
| Connector on electronics end | Correct connector for a specific brand of electronics |
| Transducer series | Mix and Match 600W Non-CHIRP |
| Weight | 1.25 lb |
Transducers in this range
Mix and Match 600W transducers include the B117, B45, B60, P319, P66 (not all models), P79, SS505 and SS60. This cable cannot be used with 1kw transducers.
A 12m (40′) extension cable, part MM-5P-5P, is available with one male and one female 5-pin connector.






