Description
The Airmar M260-66-7V2 is a 1 kW in-hull transducer for conventional dual-frequency fishfinders, operating at 50 and 200 kHz. It is installed inside the hull in a tank cut to the boat’s deadrise angle, so you don’t have to drill a hole through the hull. It is a good option for trailered or multi-hulled boats.
Features
- 1 kW power rating with 50 and 200 kHz dual-frequency operation
- Narrow 6 degree beam at 200 kHz for target resolution and sharp images of fish near wrecks and reefs
- Wide 19 degree beam at 50 kHz for deep-water detection and broad coverage under the boat
- Mounts inside the hull in the included tank, with no hole drilled in the hull
- Maximum depth of 735 m (2500′) at low frequency and 294 m (1000′) at high frequency
- Layered plastic urethane (LPU) acoustic window
Specifications
| Part number | M260-66-7V2 |
| Brand | Airmar |
| Power rating | 1 kW |
| Frequency band | 50/200 kHz |
| Single or dual frequency | Conventional Dual Frequency |
| Conventional beam | 19 degrees/6 degrees |
| High frequency beamwidth | 6 degrees |
| Mounting style | In-Hull |
| Transducer functions | Depth |
| Max depth | Low frequency- 735 m (2500′), High frequency- 294 m (1000′) |
| Connector | Simrad 7-Pin, JRC 7-Pin, Raytheon 7-Pin, Apelco 7-Pin |
| Display connector | 7 |
| Sensor connector | MM1 |
| Cable length | 10 m (33′) |
| Weight | 6.2 kg (13.5 lb.) |
| Acoustic window | Layered plastic urethane (LPU) |
| Tilted element | No |
| Deadrise range | 0 degrees to 22 degrees |
| Max deadrise | Up to 30 degrees |
| Max vessel LOA | Up to 11 m (36′) |
| Hull material | Solid fiberglass only |
What’s included
- M260-66-7V2 in-hull transducer
- Two-piece tank, cut to the boat’s deadrise angle and affixed inside the hull
Connectors and Hull Fit
- Connectors: Simrad 7-Pin, JRC 7-Pin, Raytheon 7-Pin, Apelco 7-Pin
- Hull material: solid fiberglass only
- Max deadrise: up to 30 degrees
- Max vessel LOA: up to 11 m (36′)






