Description
The Airmar DST810-SV-N2 is a smart multisensor in a stainless steel housing that measures depth, speed through water, water temperature and heel and trim. It sends its data to the NMEA 2000 network. Airmar’s CAST app connects over Bluetooth so you can calibrate the speed reading and configure the sensor from a wireless device, and speed-through-water data starts below 0.3 knots.
Features
- Measures depth, speed through water, water temperature, and heel and trim from one sensor
- Speed output updates 5X per second for smoother speed-through-water reporting
- Integrated attitude sensor for heel and trim, with simple attitude calibration to correct off-center mounting
- Gen2 paddlewheel gives speed data below 0.3 knots at start-up, linear at 0.6 knots, and accurate up to 45 knots
- Wireless calibration through Airmar’s CAST app over Bluetooth Low Energy, regardless of the instrument brand on board
- Advanced speed calibration takes manual speed entries for multiple heel angles and up to 10 speeds
- Enable or disable PGNs and set offset and output rates from the CAST app
- All speed calibrations and NMEA configurations are stored in the sensor, not in the displays
Specifications
| Model | DST810 |
| Part number | DST810-SV-N2 |
| UPC | 801769029208 |
| Housing | Stainless steel, with valve |
| Weight | 1.9 kg (4.2 lb) |
| Acoustic window | Urethane |
| Hull deadrise | Up to 22° |
| Depth frequency | 235 kHz |
| Minimum depth range | 0.5 m (1.6′) |
| Maximum depth range | Up to 100 m (330′) NMEA 2000 |
| Speed range | Up to 45 knots |
| Depth update rate | 1X/second |
| Speed update rate | 5X/second |
| Heel/trim update rate | 10X/second |
| Attitude accuracy | +/– 1° nominal after sensor calibration |
| Pulse rate | 20,000 p/nm (5.6 Hz per knot), where p/nm is pulses per nautical mile |
| Pressure rating | 3 m (10′) |
| Supply voltage | 9 VDC to 16 VDC, per NMEA 2000 |
| Supply current | <200 mA, per NMEA 2000 |
| Wireless protocol | Bluetooth Low Energy (BLE) |
| Wireless range | Up to 30 feet depending on mount location |
| Standard cable length | 6 m (20′) DeviceNet, NMEA 2000 |
| Temperature sensor accuracy | ±0.5°C (±1.8°F) |
| Temperature sensor range | -10°C to 40°C (14°F to 104°F) |
| NMEA 2000 Load Equivalency Number (LEN) | 3 |






