Airmar B164-20-6G 1kW Thru-Hull Transducer 20-Degree Tilt Garmin 6-Pin

$1,416.81 USD

Airmar B164-20-6G is a flush-mount, 1 kW bronze thru-hull transducer with a 20-degree tilt, built for 16 to 24 degree deadrise hulls and Garmin units with a 6-pin connector.

Ships from manufacturer within 2 weeks

SKU: B164-20-6G Category: Tags: , Brand:

Description

Airmar B164-20-6G is a 1 kW, flush-mount bronze thru-hull transducer with a fixed 20-degree tilted element. It suits fast, trailered sportfishing boats that cannot take a high-performance fairing, because its housing sits low below the hull.

Features

  • 1 kW (1,000 Watts) RMS power, with 50/200 kHz frequency
  • Fixed 20-degree tilt for hulls with 16 to 24 degree deadrise
  • Ceramic arrays tilted inside the housing for a vertical beam directly below the boat
  • Bronze housing protrudes less than 6.35 mm (0.25) outside the hull
  • Airmar says the housing can sit on trailer rollers and bunks with no damage
  • Includes a depth and fast-response water-temperature sensor
  • Engineered for center-console and trailered boats, 8 m to 11 m (25′ to 35′)

Specifications

Part number B164-20-6G
UPC 801769006711
Power 1 kW (1,000 Watts) RMS
Frequency 50/200 kHz
Cone at 50 kHz 22 degrees x 20 degrees
Cone at 200 kHz 6 degrees x 6 degrees
Maximum depth range at 50 kHz 353 m to 529 m (1,200′ to 1,800′)
Maximum depth range at 200 kHz 152 m to 235 m (500′ to 800′)
Tilt Fixed 20 degrees
Hull deadrise 16 degrees to 24 degrees
Housing Bronze
Hull protrusion less than 6.35 mm (0.25)
Usable shaft length approx. 71 mm (2.80)
Boat size 8 m to 11 m (25′ to 35′)
Connector 6-pin Garmin
Sensors Depth and water temperature

What’s included

  • Transducer with cable

Fits

Fits Garmin units with a 6-pin connector. Interfaces to any 600 W or 1 kW echosounder.