Description
The Raritan 172012 water heater is a 20-gallon unit with a heat exchanger, rated for 240 volts. It is a small, insulated tank that sits downstream of the pump, so the boat needs a pressurized water system to run it. The heat exchanger coil lets the engine heat the water while the engine is running.
Features
- Heat exchanger coil, almost 7-foot-long, heats the tank water from the engine’s hot coolant while the engine runs
- Recovery rate can be as high as 18 gallons per hour
- High-density non-CFC foam insulation helps the tank keep hot water longer
- Adjustable thermostat can be set as high as 160 degrees F
- Glass-lined steel tank with a polymer jacket; Raritan says the jacket resists corrosion from dampness
- Replaceable magnesium anode; Raritan says it protects the tank and neutralizes acids in the water
- All plumbing connections on one side; retrofits without difficulty to most onboard pressure systems
Specifications
| Part number | 172012 |
| Brand | Raritan |
| Tank size | 20-gallon |
| Volts | 240 |
| Recovery rate | can be as high as 18 gallons per hour |
| Heat exchanger coil | almost 7-foot-long, inside the tank |
| Thermostat | adjustable, as high as 160 degrees F |
| Tank | glass-lined steel |
| Jacket | polymer |
| Insulation | high-density non-CFC foam |
| Anode | replaceable magnesium |
| Hot and cold water fittings | 3/4 in. male NPT |
| Heat exchanger fittings | 3/4 in. female NPT |
| Plumbing connections | all on one side |
Installation notes
- Use only metal fittings to plumb a water heater, never plastic.
- A check valve is required in the pump outlet line or in the heater to prevent hot water from migrating back toward the pump.
- If a pressure-release valve isn’t integral, the heater will have a fifth port for this essential component.
- The heat exchanger connection varies depending on engine installation.
Warranty
The tank is covered by a five-year Limited Warranty. Each unit is backed by Raritan’s two-year Limited Warranty.






