Description
The Victron Skylla-TG 24/30 (1+1) is a 24 V battery charger with two outputs, listed under part number SDTG2400301. It has a 30 A main output for the main battery and a 4 A output meant for a starter battery. It takes 230 V AC input at 50/60 Hz and charges in three steps under microprocessor control.
Features
- 30 A main output for the main battery
- 4 A secondary output, intended to top up a starter battery
- Three-step charging, controlled by a microprocessor
- Battery temperature sensor included; charge voltage drops as battery temperature rises
- Battery voltage sense facility to offset voltage loss from cable resistance
- Charge voltage can be precisely adjusted
- Protection against output short circuit, battery reverse polarity, battery voltage too high and temperature too high
Specifications
| Part number | SDTG2400301 |
| UPC | 8719076025719 |
| Brand | Victron Energy |
| DC output voltage | 24 V |
| Main charge current | 30 A |
| Secondary charge current | 4 A |
| Input voltage | 230 V AC |
| Input frequency | 50/60 Hz |
| Input frequency range | 45-65 Hz |
| Charge characteristic | Three-step (IUoUo) |
| Battery temperature sensor | Included |
| Dimensions (HxWxD) | 365 x 250 x 147 mm |
What’s included
- Battery temperature sensor
Compatibility
Victron says the charge voltage can be adjusted to suit sealed or unsealed battery systems. The Victron Skylla-TG 24/30 (1+1) is set up for 24 V battery systems, and the battery temperature sensor is especially recommended for sealed batteries.






