Description
The SmartSolar MPPT RS 450/200-MC4 is a Victron solar charge controller for 48 V battery banks, built for large series-connected PV arrays. It has 4 trackers, a 200 A rated charge current and an MPPT operating voltage range of 65-450 V. Victron describes it for large off-grid and grid-connected battery systems.
Features
- Connects to a PV array of 65 to 450 V Voc and charges 48 V battery banks.
- Rated charge current of 200 A, with a maximum DC output charging power of 11,520 W for all trackers combined.
- Four independent trackers, each with a maximum PV array size of 7,200 W and a maximum PV short circuit current of 20 A.
- Charge settings are fully programmable, including for battery chemistries such as lead-acid and lithium.
- Set up and monitor over Bluetooth with the VictronConnect app, including battery and PV voltage and current.
- VE.Can ports let up to 25 units run in parallel and synchronise their charge stages when daisy-chained with an RJ45 cable.
- Front-panel display shows battery volts, charge current, PV voltages and error codes.
- Metal case with fully covered electrical connections, and active cooling.
Specifications
| Part number | SCC145120512 |
| UPC/EAN | 8719076062752 |
| Battery voltage | 48 V |
| Rated charge current | 200 A |
| Maximum DC output charging power, all trackers combined | 11,520 W |
| Number of trackers | 4 |
| MPPT operating voltage range | 65 to 450 V |
| Maximum PV DC voltage | 450 V |
| Maximum PV array size per tracker | 7,200 W |
| Maximum PV short circuit current per tracker | 20 A |
| PV connection terminal type | MC4 male/female pair per tracker |
| Battery connection terminal type | M8 bolts (two for positive and two for negative connection) |
| Charge voltage absorption | 57.6 V (adjustable) |
| Charge voltage float | 55.2 V (adjustable) |
| Maximum efficiency | 96 % |
| Data communication | VE.Direct, VE.Can, Bluetooth |
| Operating temperature range | -40 to 60 °C |
| Protection category | IP21 |
| Enclosure material | Steel |
| Colour | Blue (RAL 5012) |
| Width | 434 mm |
| Height | 487 mm |
| Depth | 146 mm |
| Weight | 13.7 kg |
| Safety standard | EN-IEC 62109-1 |
Works with
Victron lists the following for this charge controller:
- 48 V battery banks, with a PV array of 65 to 450 V Voc.
- The VictronConnect app over Bluetooth, for setup and monitoring.
- A GX device such as the Cerbo GX, for monitoring over the VE.Can cable.
- The Victron smallBMS and other BMS units with allow-to-charge signals, at the remote input.
Warranty
Victron describes a 5-year standard warranty and a global repair service for this product.






